Thermwood Users

Post Reply
John Tortorello
Posts: 4
Joined: Tue Nov 10, 2009 5:44 pm

Thermwood Users

Post by John Tortorello »

I have a thermwood CS40, is there anyone using vcarve pro with a simuliar machine who can let me know what to expect when running the software?

John

tmerrill
Vectric Wizard
Posts: 4797
Joined: Thu May 18, 2006 3:24 pm
Model of CNC Machine: ShopBot
Location: North Carolina

Re: Thermwood Users

Post by tmerrill »

John,

Other people's opinions are always useful, but I highly recommend downloading the trial version and cutting the provided samples on your machine. Then you will be able to see with your own eyes.

The trial versions are complete versions with all the features working. The limitation is it only allows the provided samples to be toolpathed for your machine.

Tim

cabnet636
Vectric Wizard
Posts: 2596
Joined: Fri Dec 21, 2007 1:57 am
Model of CNC Machine: CAMaster 508 ATC
Location: columbia sc
Contact:

Re: Thermwood Users

Post by cabnet636 »

micheal k has two thermwoods and was in dallas with us this weekend, i will see if i can find him he is pretty succeccful with his

jim
James McGrew
http://www.mcgrewwoodwork.com
CAMaster ATC 508 24/7 http://dropc.am/p/EJaKyl

Post Reply