Shark and Control box

Post Reply
Dash66
Posts: 29
Joined: Tue Jan 10, 2012 4:45 pm
Model of CNC Machine: Shark Pro Plus

Shark and Control box

Post by Dash66 »

I am running a Shark and a jtech laser mounted. The laser will not fire until the software goes into plunge mode. I have everything set to zero however when I hit run file, my machine always rises .425 inches. I cannot find where to stop this action..... Please help!!

Steve Misher
Vectric Apprentice
Posts: 88
Joined: Thu Feb 02, 2017 2:40 am
Model of CNC Machine: Axiom AR4
Location: Wisconsin

Re: Shark and Control box

Post by Steve Misher »

Contacting Next Wave would be the first thing to do! They should know more about your machine than anyone.

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: Shark and Control box

Post by martin54 »

Have you checked your toolpath set up pop out for home position & safe z height ?

Shark have their own forum so might be worth asking in there as more people will be familiar with the machine & control software :lol: :lol:

Post Reply