Shark and Control box
Shark and Control box
I am running a Shark and a jtech laser mounted. The laser will not fire until the software goes into plunge mode. I have everything set to zero however when I hit run file, my machine always rises .425 inches. I cannot find where to stop this action..... Please help!!
-
- Vectric Apprentice
- Posts: 88
- Joined: Thu Feb 02, 2017 2:40 am
- Model of CNC Machine: Axiom AR4
- Location: Wisconsin
Re: Shark and Control box
Contacting Next Wave would be the first thing to do! They should know more about your machine than anyone.
- martin54
- Vectric Archimage
- Posts: 7339
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Shark and Control box
Have you checked your toolpath set up pop out for home position & safe z height ?
Shark have their own forum so might be worth asking in there as more people will be familiar with the machine & control software
Shark have their own forum so might be worth asking in there as more people will be familiar with the machine & control software