AXYZ Toolpath problems

AXYZ Toolpath problems

Postby guamcnc » Wed Oct 31, 2012 9:31 pm

Hi everyone, anybody using a AXYZ Machine with Toolpath. I cannot get the tool path software to accept Aspire files, keep getting "critical error, program terminated". AXYZ want a $12,000 ransom to get my machine software working/repaired. Please help..........
Posts: 3
Joined: Wed Oct 31, 2012 12:24 am
Model of CNC Machine: axyz 5012

Re: AXYZ Toolpath problems

Postby Adrian » Wed Oct 31, 2012 10:14 pm

Which post processor are you using in Aspire to create the files that you are loading into the toolpath software?
User avatar
Vectric Archimage
Posts: 9999
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: AXYZ Toolpath problems

Postby John Murphy » Wed Oct 31, 2012 11:29 pm

I'm running an AXYZ 5010 with a tool changer.

Once the post was sorted out, I've never had any issues with Aspire.

If The guys at Vectric give the Ok, I'd be happy to send it to you.

John Murphy
Vectric Wizard
Posts: 676
Joined: Thu Jan 15, 2009 1:08 am
Location: Maryhill Ontario Canada
Model of CNC Machine: AXYZ 5010

Re: AXYZ Toolpath problems

Postby Mark » Thu Nov 01, 2012 2:07 pm

Hello guamcnc,

I am not sure that the problem that you are describing is a post processor problem.
If the control software on your machine is not working, you will need to address this
problem first.

If there is anything that you think that we might be able to help with, please drop us an
email to support.

I hope that this helps,


User avatar
Vectric Staff
Posts: 1555
Joined: Sat Aug 18, 2007 2:55 pm
Location: Alcester U.K.
Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000

Re: AXYZ Toolpath problems

Postby rscrawford » Thu Nov 01, 2012 3:20 pm

Geez, for $12,000 you could get a whole new control system for your CNC, complete with WinCNC and a mother/daughter board, control board, new servo motors and drivers, a new computer, etc. . . And all that would probably be less than half their repair cost. . .
Russell Crawford
User avatar
Vectric Wizard
Posts: 965
Joined: Mon Jan 17, 2011 6:49 pm
Location: Wetaskiwin, Alberta
Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408

Return to Control Software related questions

Who is online

Users browsing this forum: No registered users and 2 guests