Jim, it's great to see your finally there! What software are you using?cabnet636 wrote:making chips!!
jim
rotary axis machines
Re: rotary axis machines
-
JCTalbert,LLC
- Vectric Craftsman
- Posts: 153
- Joined: Tue Oct 20, 2009 2:27 am
- Location: Nottingham, Pa
Re: rotary axis machines
Congrats Mr. Mcgrew.... Me next... I'll be calling for assistance...
JCTalbert, LLC
Jim Dell(JD)
Custom CNC Services
Cabinet Design and Manufacturing
610.467.0CNC
Jim Dell(JD)
Custom CNC Services
Cabinet Design and Manufacturing
610.467.0CNC
-
cabnet636
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
-
Rcnewcomb
- Vectric Archimage
- Posts: 5908
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: rotary axis machines
Filnally pulled the indexer out from under the table where it had been languishing for the past four years. Not as nice as Jim's work, but a start...
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
cabnet636
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: rotary axis machines
man i am looking forward to meeting you in dallas!!
jim
jim
Re: rotary axis machines
I finally got my 4th axis running / testing.
The machine is a Atlas Knee mill 9 x 42
Control Software Mach3
Cut length 36+ inches
Cut Diameter 6+ inches
Alignment of A axis is along X
Here is a couple of pictures of the setup.
I used a rotary table that I had. I think the ratio
is 72:1
olf20 / Bob
The machine is a Atlas Knee mill 9 x 42
Control Software Mach3
Cut length 36+ inches
Cut Diameter 6+ inches
Alignment of A axis is along X
Here is a couple of pictures of the setup.
I used a rotary table that I had. I think the ratio
is 72:1
olf20 / Bob
- Attachments
-
-