Missing dongle for New hermes IS400 Gravograph Gravostyle
-
- Posts: 2
- Joined: Wed Jul 29, 2009 7:27 pm
Missing dongle for New hermes IS400 Gravograph Gravostyle
I have a New Hermes IS400 machine bought from a jewelry store that was siezed for tax evasion. When they seized the store, they took all the computers, including the engraving machine controller. I have a new computer for the machine and the gravostyle software, but am missing the dongle. I would be very interested if anyone has one they are not using. I can be contacted through the day at 317-684-9435. Thanks, Dennis
Re: Missing dongle for New hermes IS400 Gravograph Gravostyle
hello
if it is a new machine, the company probably gives you a second due it's warranty...
thanks
viktor
if it is a new machine, the company probably gives you a second due it's warranty...
thanks
viktor
-
- Posts: 2
- Joined: Wed Jul 29, 2009 7:27 pm
Re: Missing dongle for New hermes IS400 Gravograph Gravostyle
Thanks for the reply. It is not a new machine, probably 7 -8 years old, and we are the second owner, so New Hermes will not help us. Thanks.