Vacuum Pump

Post Reply
User avatar
Ms Wolffie
Vectric Wizard
Posts: 2695
Joined: Sat Mar 31, 2012 10:41 pm
Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
Location: Tully Heads, Wet Tropics, Queensland, Australia

Vacuum Pump

Post by Ms Wolffie »

I am considering buying a 4x6 machine with vacuum table.
I made a mistake once and bought an inferior pump.
For this table they use 2 pumps.They sent me a photo of the label, as far as I can see, this is what it says.
2.2 Kw
50 Kz
155 m3/min
31 kg
220 V
2700 l/min
-34 Kpa

For those in the know, is that big enough?
TIA
Cheers
Wolffie

Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6

cascayou
Posts: 5
Joined: Sun Nov 17, 2013 7:15 am
Model of CNC Machine: Axiom Elite
Location: Las Vegas
Contact:

Re: Vacuum Pump

Post by cascayou »

You might want to check with an electrician, I think it might run hot since we have 60 Herz in the US

PaulRowntree
Vectric Wizard
Posts: 1687
Joined: Sun Oct 24, 2010 7:28 pm
Model of CNC Machine: homebuilt 4'x2' (Mach3+G540)
Location: Guelph, Ontario
Contact:

Re: Vacuum Pump

Post by PaulRowntree »

cascayou wrote:You might want to check with an electrician, I think it might run hot since we have 60 Herz in the US
Wolffie is from a land down under ...
Paul Rowntree
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com

User avatar
martin54
Vectric Archimage
Posts: 7332
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: Vacuum Pump

Post by martin54 »

I take it the table is zoned so each vac pump covers half the table :lol: :lol:

Have you got a link if you are buying this from a company ??? :lol:

Oh good to see you back posting :lol:

Post Reply