Getting started
-
- Posts: 24
- Joined: Sat Aug 22, 2015 1:41 am
- Model of CNC Machine: 141001
- Location: Chula, MO
Getting started
I have purchased a CNC Piranha about 2 years ago. I kept it clean and under wraps until I could dedicate my time to learning about its use. I recently purchased "Cut2D Desktop" in order to start my journey in learning how to use this machine. I designed a simple sign and saved it according to the tutorials but when I connected everything up and applied power the only thing that happened was two lights lit up, ( one green and one red). There was also a low thumping sound from the 'z' axis motor. The little monitor that cam with the machine din not turn on. The paperwork that cam with the machine had no troubleshooting section that I could discover what was wrong. Could I receive some assistance in this matter.
-
- Vectric Craftsman
- Posts: 193
- Joined: Sun Nov 04, 2012 4:27 pm
- Model of CNC Machine: PRS Buddy48alpha ,4x6' 130w laser, Wazer
Re: Getting started
I think you need to talk to Piranha about this, Gunny. Do they have a help line or a forum?
- FixitMike
- Vectric Wizard
- Posts: 2177
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Re: Getting started
The Piranha is made by Next Wave Automation. They have a web site with help information as well as a users forum.
https://shop.nextwaveautomation.com/sho ... v8EALw_wcB
https://shop.nextwaveautomation.com/sho ... v8EALw_wcB
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
-
- Posts: 24
- Joined: Sat Aug 22, 2015 1:41 am
- Model of CNC Machine: 141001
- Location: Chula, MO
Re: Getting started
Thanks I will contact them.
-
- Vectric Apprentice
- Posts: 52
- Joined: Wed May 10, 2017 5:11 pm
- Model of CNC Machine: ELU860
Re: Getting started
Yes call Piranha support.
But 2 years later, you may find that you are out of warranty.
Find a dedicated Piranha CNC forum and post the same question....chances are that another user has experienced the same or similar issue.
I guess you've looked online and read the manual troubleshooting section?
But 2 years later, you may find that you are out of warranty.
Find a dedicated Piranha CNC forum and post the same question....chances are that another user has experienced the same or similar issue.
I guess you've looked online and read the manual troubleshooting section?