Surfacing bits

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Surfacing bits

Post by highpockets »

dah79 wrote:John,
What size spindle/router are you running that on?
Dave
2 1/2HP router with 1/2"chuck. I run the bit at 8000rpm and use a ramp into the spoil board. I also only take a shallow cut usually 2-5 thousands 10 thousands is a heavy cut.
John
Maker of Chips

Joe Travis
Posts: 8
Joined: Tue Apr 07, 2015 1:33 pm
Model of CNC Machine: CaMaster Stringer 2

Re: Surfacing bits

Post by Joe Travis »

Dave, i'm happy with a bit from southeast tool SPOIL25-2 - 2 1/2".

I couldn't find a way to reply to your MP this morning. Hope this works!
Hit me at woodworkingnd@live.com

Joe

Post Reply