I’m looking for a Digitizing Tablet DXF that I can use to input part drawings into aspire software. The accuracy can be around .01. I do not want to spend over $1000 for something around 12 X 18 inches. Do you have any suggestions?
Thanks.
Digitizing Tablets
- Leo
- Vectric Wizard
- Posts: 4092
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Digitizing Tablets
Do you know anybody with an 11x17 scanner?
Maybe you could go to your local office supply store and get it scanned.
Once scanned you can vectorize it on your screen
Maybe you could go to your local office supply store and get it scanned.
Once scanned you can vectorize it on your screen
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Vectric Apprentice
- Posts: 92
- Joined: Mon Jan 18, 2016 8:55 pm
- Model of CNC Machine: Axiom Elite 4 X 4
Re: Digitizing Tablets
Not familiar with how I would vectorize a scanner image to scale?
Re: Digitizing Tablets
I bought a MicroScribe Digitizing years ago when I got the Rhino Software. I have never used it and it just sits in a closet. I know it works with Rhino and Solidworks, but not sure about other software compatibility. If it's something you can use, let me know, you can get it for pennies on the dollars. I don't use it, so make me an offer. email: garylmast@earthlink.net
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: Digitizing Tablets
You can scale a scanned image to an exact size by importing the image into Aspire/VCP, and then constructing a rectangle onscreen with dimensions that correspond to the actual length and width of the image. Then, expand the imported-scanned image to match the constructed rectangle.
My local copy shop has a large scanner, and they can produce a PDF file of the scanned image that works well for this purpose.
Angie
My local copy shop has a large scanner, and they can produce a PDF file of the scanned image that works well for this purpose.
Angie
-
- Vectric Apprentice
- Posts: 92
- Joined: Mon Jan 18, 2016 8:55 pm
- Model of CNC Machine: Axiom Elite 4 X 4
Re: Digitizing Tablets
That make sense, that would scale the drawing to size. I will give it a try. Thanks.