CNC Production Routing Guide

Post Reply
User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

CNC Production Routing Guide

Post by Rcnewcomb »

Lots of good information in this booklet from Onsrud about router bits, different materials, feeds and speeds, cutting techniques, troubleshooting, etc.
->Link

I've attached a copy here too.
Attachments
LMT-Onsrud-CNC-Prod-Routing-Guide.pdf
(1.06 MiB) Downloaded 2021 times
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

User avatar
Bob Jr
Vectric Wizard
Posts: 461
Joined: Thu Aug 13, 2009 2:13 am
Model of CNC Machine: Axiom, Shark

Re: CNC Production Routing Guide

Post by Bob Jr »

Thank you, This is a lot of good information.
I'll see that everyone in our cnc group gets a copy.
Bob
"Be accurate."
W. Tell

User avatar
Leo
Vectric Wizard
Posts: 4083
Joined: Sat Jul 14, 2007 3:02 am
Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
Location: East Freetown, Ma.
Contact:

Re: CNC Production Routing Guide

Post by Leo »

Randall, that is fantastic information. I will print that and put it in my notebook in my shop. Thank you.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC

Post Reply