Hello to the forum,
Newbie here. Does anyone have experience with a CAMaster Stinger II router and Aspire?
Thanks.
Al Allison
CAMaster with Aspire
-
- Posts: 38
- Joined: Sat Nov 01, 2014 1:59 pm
- Model of CNC Machine: Shop Sabre 4896
- martin54
- Vectric Archimage
- Posts: 7352
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: CAMaster with Aspire
There are people with all sorts of different brand & model machines on the forum, Camaster stingers have definately been talked about but don't know if it was a mk11.
If you have specific questions you would probably be better off just asking them in the relevant sections.
Oh & welcome to the forum, very friendly place with lots of help from some exceptionally talented people. Unfortunately I'm not one of them
If you have specific questions you would probably be better off just asking them in the relevant sections.
Oh & welcome to the forum, very friendly place with lots of help from some exceptionally talented people. Unfortunately I'm not one of them
-
- Posts: 38
- Joined: Sat Nov 01, 2014 1:59 pm
- Model of CNC Machine: Shop Sabre 4896
Re: CAMaster with Aspire
Thanks for the response Martin54, and for the Welcome!
- rscrawford
- Vectric Wizard
- Posts: 1104
- Joined: Mon Jan 17, 2011 6:49 pm
- Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408
- Location: Wetaskiwin, Alberta
- Contact:
Re: CAMaster with Aspire
I have a CAMaster Cobra. Really doesn't matter what machine you have. Vectric products work very well with WinCNC, which is what all CAMaster machines are using now. Very easy to tweak the post processors, which is one of the reasons I like Vectric products with WinCNC vs some of the other software I use.
Russell Crawford
http://www.cherryleaf-rustle.com
http://www.cherryleaf-rustle.com
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: CAMaster with Aspire
I also have a CAMaster but not a Stinger. Russell is right all Vectric products work great with the CAMaster. If you want to ask questions about the software then this is the place but if you need help with WINCNC or CNC help then the CAMaster forum will be the place you want to go. There's some really good help there with almost anything you would need.
Welcome to the Forum.
Mark
Welcome to the Forum.
Mark
-
- Posts: 38
- Joined: Sat Nov 01, 2014 1:59 pm
- Model of CNC Machine: Shop Sabre 4896
Re: CAMaster with Aspire
Hi Russell and Mark,
Thank you for the information and the confirmation. I have been practicing with Aspire for a month or so and have just ordered the CAMaster. I can't wait!
Al Allison
Thank you for the information and the confirmation. I have been practicing with Aspire for a month or so and have just ordered the CAMaster. I can't wait!
Al Allison