Controller Wiring Pinouts

Post Reply
dreiii
Posts: 30
Joined: Tue Aug 21, 2012 5:57 pm
Model of CNC Machine: Shark-Sherline-Diode Laser-Ender3-K40
Location: Frogmore, Louisiana

Controller Wiring Pinouts

Post by dreiii »

Is there anywhere to find to pinouts for the wiring on the shark controllers? I really would like to wire my sherline motors to my controller as this would eliminate a second computer running Linux and EMC2(LinuxCNC).

User avatar
zeeway
Vectric Wizard
Posts: 3157
Joined: Thu Feb 11, 2010 9:24 pm
Model of CNC Machine: Self-built
Location: SC, USA

Re: Controller Wiring Pinouts

Post by zeeway »

Suggest you try here:

http://www.cncsharktalk.com/

Angie

dreiii
Posts: 30
Joined: Tue Aug 21, 2012 5:57 pm
Model of CNC Machine: Shark-Sherline-Diode Laser-Ender3-K40
Location: Frogmore, Louisiana

Re: Controller Wiring Pinouts

Post by dreiii »

If you know "specifically" where on their site, please let me know. I have looked there and can find no technical info anywhere.

Dclifton2
Vectric Wizard
Posts: 320
Joined: Sat Feb 13, 2010 9:41 pm
Model of CNC Machine: home built shopbot clone. CNC lathe
Location: Port Orange Fl.

Re: Controller Wiring Pinouts

Post by Dclifton2 »

The shark uses gecko 250 drives. I converted on to mach3 for a friend. I don't remember the pinout but should be easy by looking at the gecko web site.
Don

Post Reply