Hello all,
I have been trying to create a custom form tool for a special bit we had ordered. No matter what I try I get no suitable vector selected for form tool. I created a right handed edge profile and it won't except any shape I want to use.
Any advice would be welcomed.
-Wayne
Custom Form Tool
- HMPrintDesign
- Posts: 16
- Joined: Fri Jul 08, 2016 10:04 pm
- Model of CNC Machine: X-Carve 1000
- Location: Richfield Springs, NY
- Contact:
Custom Form Tool
Thank you,
Stephen and Wayne Hesler-Mondore
HM Print and Design
hmprintdesign.com
Stephen and Wayne Hesler-Mondore
HM Print and Design
hmprintdesign.com
- IslaWW
- Vectric Wizard
- Posts: 1403
- Joined: Wed Nov 21, 2007 11:42 pm
- Model of CNC Machine: CNC Controller Upgrades
- Location: Bergland, MI, USA
Re: Custom Form Tool
Post a picture of the bit
Gary Campbell
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Custom Form Tool
Yes, please do show us a picture of your bit (or your actual .crv file where you have drawn the profile)
Adding a custom form tool is not difficult - if you have drawn the right-hand half of your bit profile properly. In every case where I've seen a failure, the vector bit profile drawing was incorrect and/or had a "defect" introduced when it was drawn (undercut shape, or appropriate vector nodes not joined, or nodes crossover the vertical centerline are common errors)
Here is a step-by-step written guide:
http://support.vectric.com/aspire-quest ... ustom-tool
Here are a couple video tutorial links (if you need them):
Adding a custom form tool is not difficult - if you have drawn the right-hand half of your bit profile properly. In every case where I've seen a failure, the vector bit profile drawing was incorrect and/or had a "defect" introduced when it was drawn (undercut shape, or appropriate vector nodes not joined, or nodes crossover the vertical centerline are common errors)
Here is a step-by-step written guide:
http://support.vectric.com/aspire-quest ... ustom-tool
Here are a couple video tutorial links (if you need them):
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC