gcode file
gcode file
Hi, is there a way to generate a vcarve file from a gcode file?? I had a guy make a cool carve up and sent me the file, only to find out he didn't save the vcarve file and only the gcode file. And of course I cannot see anything of what he used for the carve. Thanks, I'm sure this has been asked a million times, TIA
-
martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: gcode file
Not sure how many times but yes been asked before 
This is one I found with a search, there are others.
http://forum.vectric.com/viewtopic.php? ... de#p184154
This is one I found with a search, there are others.
http://forum.vectric.com/viewtopic.php? ... de#p184154
Re: gcode file
Thank you Martin, sorry for the late reply, grandsons are very demanding, and I will try your link and see what I can do, I will let you know if it works if you like.
Re: gcode file
Hi Martin, well, I did a search for gcode to dxf as they said, downloaded g-code ripper and its worked pretty good, although I will have totry and clean it up, its got everything in order. Thanks for your help. Ken