I am not sure what the correct definition is, therefore I am not able to find what I want even if it exists. I will try and explain what I am attempting to do and hopefully, someone can point me in the right direction.
If you take the capital letter L and you were looking straight down on it like viewing it on the screen. I want to make the base cut in a 1" piece of wood, so I start out with a flat surface 3/4" down from the surface of the material. Now I want to start taking small cuts approx. .005 at a time up from there. I want to move up (y-axis) and to the right different amount, but always moving the Z-axis .005 up each pass. For instance, right .007 (x-axis) / up .0035 (y-axis) continue that same steps for 1/2" and then change the right steps ( x-axis) to .000 and the up step (X axis} to .005 until I have reached the surface height of the material. What I am trying to do is create a double compound angle for another piece of wood to fit into. I am using VCarve Pro and I do not have a 4,5, or 6 way head, so by decreasing the cut out coming up, I should be able to create the step needed. I hope all this makes sense and is not I greatly apologize.
Randy W Benetti, Sr.