Chicago User Group Meeting 2018 Agenda
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Chicago User Group Meeting 2018 Agenda
Hi Everyone,
We are thrilled to announce the agenda for the upcoming User Group Meeting in Chicago!!
This year, in addition to your Vectric presenters we have a huge line up of inspiring guest speakers, take a look at the schedule below:
DAY 1:
Welcome & Agenda with Edward
Vectric V9.5 - What's New with Dan
**break**
Vectric - Funky Features with Edward
Vectric - Labs Project with Beki
**Lunch**
Slicing the Arch of Titus with Neathawk Designs
Sliding Dovetails with John Haggerty
Vectric - Laser Hybrid Machining with Edward
Laser Retrofit with Jay Johnson J-Tech Photonics
**break**
Pen Turning with Nextwave and Randy Johnson
Vectric - Tips and Tricks with Beki
DAY 2:
Vectric Project with Dan & Adam
Rotary Machining with Nathan Skalsky
Growing a CNC hobby into a business with Eric Royner
**break**
Vectric - Design Composition with Todd
Haffners Wonderful Creations with Doug Haffner
**Lunch**
Mixed Material Inlays with Ryan Montgomery
Vectric - Labs Project with Beki
Hidden Gems with Dan
Jimmy DiResta
**break**
Vectric & Community with Stephanie
Vectric - Make it your own with Design & Make - Todd
Light It Up with Michael Tyler
Vectric - The Wrap Up with Edward
As if that wasn't enough, we have arranged for some of our machine tool partners to be available during break times and lunch times at the event so that you can speak to them about your needs.
We are looking forward to welcoming all of this years attendees to our event in 25 days
Thanks
Stephanie
We are thrilled to announce the agenda for the upcoming User Group Meeting in Chicago!!
This year, in addition to your Vectric presenters we have a huge line up of inspiring guest speakers, take a look at the schedule below:
DAY 1:
Welcome & Agenda with Edward
Vectric V9.5 - What's New with Dan
**break**
Vectric - Funky Features with Edward
Vectric - Labs Project with Beki
**Lunch**
Slicing the Arch of Titus with Neathawk Designs
Sliding Dovetails with John Haggerty
Vectric - Laser Hybrid Machining with Edward
Laser Retrofit with Jay Johnson J-Tech Photonics
**break**
Pen Turning with Nextwave and Randy Johnson
Vectric - Tips and Tricks with Beki
DAY 2:
Vectric Project with Dan & Adam
Rotary Machining with Nathan Skalsky
Growing a CNC hobby into a business with Eric Royner
**break**
Vectric - Design Composition with Todd
Haffners Wonderful Creations with Doug Haffner
**Lunch**
Mixed Material Inlays with Ryan Montgomery
Vectric - Labs Project with Beki
Hidden Gems with Dan
Jimmy DiResta
**break**
Vectric & Community with Stephanie
Vectric - Make it your own with Design & Make - Todd
Light It Up with Michael Tyler
Vectric - The Wrap Up with Edward
As if that wasn't enough, we have arranged for some of our machine tool partners to be available during break times and lunch times at the event so that you can speak to them about your needs.
We are looking forward to welcoming all of this years attendees to our event in 25 days
Thanks
Stephanie
- Attachments
-
- Vectric_US_UGM_Agenda_2018.pdf
- (1.88 MiB) Downloaded 314 times
-
- Posts: 3
- Joined: Wed Nov 26, 2014 1:31 am
- Model of CNC Machine: Shark
- Location: North Prairie Wisconsin USA
Re: Chicago User Group Meeting 2018 Agenda
I have made reservations for the Chicago Forum. In planning my route I find that there 2 Embassy Suites in downtown Chicago. I can't find an address where the forum is being held, so can some one provide me with an address instead of just downtown Chicago
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Chicago User Group Meeting 2018 Agenda
Hi Woodbine
I can confirm the hotel addressfor the Vectric User Group Meeting is;
Embassy Suites Chicago Downtown Magnificent Mile
511 N. Columbus Drive Chicago, IL 60611
D:312-836-5970 F:312-836-5901
Thanks
I can confirm the hotel addressfor the Vectric User Group Meeting is;
Embassy Suites Chicago Downtown Magnificent Mile
511 N. Columbus Drive Chicago, IL 60611
D:312-836-5970 F:312-836-5901
Thanks
-
- Vectric Craftsman
- Posts: 118
- Joined: Sat Jan 06, 2018 7:09 pm
- Model of CNC Machine: DWC2440,TaigCNCMill,Dellta3003d, Epilog
- Location: Indiana, USA
Re: Chicago User Group Meeting 2018 Agenda
Did the organizers negotiate a parking rate for the Chicago USER Group Meeting?
Thanks -
Thanks -
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Chicago User Group Meeting 2018 Agenda
Hi TSM18,TSM2018 wrote:Did the organizers negotiate a parking rate for the Chicago USER Group Meeting?
Thanks -
Thank you for your question.
Rates for parking at the Embassy Suites Hotel where the UGM will be taking place are as follows:
VALET PARKING / SELF PARKING
Overnight $65 / Overnight $46
Any information you require can be found here:
https://embassysuites3.hilton.com/en/ho ... -info.html
Thanks
Stephanie
- mtylerfl
- Vectric Archimage
- Posts: 5895
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Chicago User Group Meeting 2018 Agenda
Took Uber from O'Hare airport and checked into the hotel about 2:00pm today (Wednesday, Oct. 10, Chicago time).
Getting excited already!
Getting excited already!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- Rcnewcomb
- Vectric Archimage
- Posts: 5920
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Chicago User Group Meeting 2018 Agenda
Should be there in another 2 hours
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- mtylerfl
- Vectric Archimage
- Posts: 5895
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Chicago User Group Meeting 2018 Agenda
See you soon, Randall!Rcnewcomb wrote:Should be there in another 2 hours
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- mtylerfl
- Vectric Archimage
- Posts: 5895
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Chicago User Group Meeting 2018 Agenda
Today was setting-up day! Everything is now ready for tomorrow morning's start of the 2018 Vectric UG! The venue is beautiful and enormous - two GIANT screens, plenty of tablespace, lots of smaller rooms with tables setup for samples, show-and-tell, vendor displays and more!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- mtylerfl
- Vectric Archimage
- Posts: 5895
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Chicago User Group Meeting 2018 Agenda
a few more pics...
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- Samarah
- Posts: 15
- Joined: Fri Jul 14, 2017 5:49 pm
- Model of CNC Machine: AvidCNC PRO4848; 6W Opt Laser; UCCNC
- Location: Oregon, Ohio (Go Bucks!)
Re: Chicago User Group Meeting 2018 Agenda
Great first day although colder outside than expected.
AvidCNC PRO4848; 6W Opt Laser; UCCNC; Aspire 11.5
- Rcnewcomb
- Vectric Archimage
- Posts: 5920
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Chicago User Group Meeting 2018 Agenda
Big crowd. Great presentations
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- IslaWW
- Vectric Wizard
- Posts: 1402
- Joined: Wed Nov 21, 2007 11:42 pm
- Model of CNC Machine: CNC Controller Upgrades
- Location: Bergland, MI, USA
Re: Chicago User Group Meeting 2018 Agenda
Look at all those millennials!
Gary Campbell
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: Chicago User Group Meeting 2018 Agenda
Very interesting day. Presentations moved right along, longer breaks was good, and lunch was great!
Dale
Dale
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: Chicago User Group Meeting 2018 Agenda
Another UGM has come and gone!
Once again proving that even an old dog CAN learn new tricks.
Thanks to everyone that out time and effort into a job well done.
Without Vectric and staff there would not be a meeting and without the attendees there would not be one either.
It's both that keep me coming back every time I can.
My thanks to everyone for adding meaning to a piece of my life,
Dale
Once again proving that even an old dog CAN learn new tricks.
Thanks to everyone that out time and effort into a job well done.
Without Vectric and staff there would not be a meeting and without the attendees there would not be one either.
It's both that keep me coming back every time I can.
My thanks to everyone for adding meaning to a piece of my life,
Dale
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale