moving a clip art withou it ghosting after setting tool path
-
- Posts: 24
- Joined: Thu Dec 06, 2012 8:56 pm
- Model of CNC Machine: DIY
moving a clip art withou it ghosting after setting tool path
I have been trying to figure out how to move a clip art that I have bit mapped and done tool path on it. When I try to move it by putting the box around it, the original image stays in place and I get a second image at the new location. How do I move the image?
- martin54
- Vectric Archimage
- Posts: 7339
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: moving a clip art withou it ghosting after setting tool
Can you post a screenshot ? That might help, is it identical to the image you moved? It's not a toolpath you have left turned on by any chance is it?
Or if it is the toolpath preview you will need to reset the preview for the first toolpathed & previewed image to clear
Or if it is the toolpath preview you will need to reset the preview for the first toolpathed & previewed image to clear
-
- Vectric Wizard
- Posts: 771
- Joined: Sat Jan 09, 2010 7:28 am
- Model of CNC Machine: cnc mako shark ext bed with HD 5 gantry
- Location: Buffalo,NY
Re: moving a clip art withou it ghosting after setting tool
Go to your layers tab and click on the light bulb to shut off your clipart.
Tony
Tony
What will matter is not what you bought but what you built; not what you got, but what you gave