Hello! I just bought some .STL files of 3D objects and was able to import and open them in my Vcarve Desktop but can anyone point me to some good training on how to size them for what I need? One is a very cool clock but can't figure out how to adjust the settings so it is a good height and width etc. When I tried and thought it was set and hit OK a small corner of it showed and was ginormous lol! Thanks
Zuke
.STL File import and sizing question
-
- Posts: 25
- Joined: Tue Jan 09, 2018 8:33 pm
- Model of CNC Machine: Shark HD4
- Location: Noonan, ND
- Contact:
- adze_cnc
- Vectric Wizard
- Posts: 4373
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: .STL File import and sizing question
Manual has plenty to say: https://docs.vectric.com/docs/V9.0/VCar ... a-3D-Model
-
- Posts: 25
- Joined: Tue Jan 09, 2018 8:33 pm
- Model of CNC Machine: Shark HD4
- Location: Noonan, ND
- Contact:
Re: .STL File import and sizing question
Thanks, will it work the same between desktop and Pro? I have desktop and the file you shared says pro so I'm just curious
- Adrian
- Vectric Archimage
- Posts: 14655
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: .STL File import and sizing question
There's no difference between the two versions at that level. This page explains the differences - https://www.vectric.com/products/compare.html