Hi all,
Just started working on a few small projects, and am looking at texts. Now I don't have a vbit so will have to get one, but I was wondering if anyone have examples of good fonts to use and what vbit was used with them? I'm wanting the text to be about 7-10mm.
I know its a bit of a broad subject and have searched for texts, but if I can get a good vbit then I can to a font test board
Thanks!
Vbits and Text Examples
-
- Posts: 5
- Joined: Thu Jun 14, 2018 9:19 am
- Model of CNC Machine: WorkBee
- Leo
- Vectric Wizard
- Posts: 4091
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Vbits and Text Examples
Amana
Freud
CMT
MCLS
WHITESIDE
ONSRUD
These are a few brands that have decent bits.
There are 50 or so more brands and vendors.
You can buy at Amazon, direct or at 100 or so more places.
Depending on size and style of whatever you are wanting to do - you can get 120 degree, 90, 60, 30 15 degree angles, some are pointy tip, some are rounded tip.
Without a specific example of what you want to do, it's difficult to make any sort of specific recommendation.
Freud
CMT
MCLS
WHITESIDE
ONSRUD
These are a few brands that have decent bits.
There are 50 or so more brands and vendors.
You can buy at Amazon, direct or at 100 or so more places.
Depending on size and style of whatever you are wanting to do - you can get 120 degree, 90, 60, 30 15 degree angles, some are pointy tip, some are rounded tip.
Without a specific example of what you want to do, it's difficult to make any sort of specific recommendation.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Vectric Craftsman
- Posts: 208
- Joined: Sun Jan 26, 2014 12:59 pm
- Model of CNC Machine: CAMMaster Stinger II
- Location: Romney, WV
Re: Vbits and Text Examples
The good news is you don’t have to own a bit to try it out using the preview function. If you haven’t done so already, define a few Vbits in your tool database and see how they look on any font you have installed. Make a test project with fonts sized 7-10 mm and the toolpath preview will give all you should be able to decide the best bit angle? Sorry to suggest this if you’ve already done this. Good luck.
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Vbits and Text Examples
There are some fonts that work better for vcarving better than others, but I don't recommend getting yourself stuck in a rut of using just certain fonts. I spend more time looking for just the right font then if need be I node edit the font to make it work for vcarving. Using the vcarve toolpath you can still get a lot of detail with small size type. I've carved as small as 2.5mm. It's not just about the font it's also about wood and wood prep.
My hero on small type project is Scottp5, hopefully he will chime in on this....
My hero on small type project is Scottp5, hopefully he will chime in on this....
John
Maker of Chips
Maker of Chips
-
- Posts: 5
- Joined: Thu Jun 14, 2018 9:19 am
- Model of CNC Machine: WorkBee
Re: Vbits and Text Examples
Thanks guys for the advice. Think I rushed it abit and completely forgot that I also have an engraving bit so will probably mock something up with different text to see what best fits!
- mezalick
- Vectric Wizard
- Posts: 2981
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: Vbits and Text Examples
If you're looking for great professionally designed fonts then I would strongly suggest you look thru the "Letterhead Fonts" website..
https://www.letterheadfonts.com/index.php
It don't get much better than that.
Michael
https://www.letterheadfonts.com/index.php
It don't get much better than that.
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- newmexico
- Vectric Craftsman
- Posts: 142
- Joined: Thu Dec 10, 2015 1:31 pm
- Model of CNC Machine: Shopbot
- Location: New Mexico
- Contact:
Re: Vbits and Text Examples
Yes, Letterhead fonts are great.
- sharkcutup
- Vectric Wizard
- Posts: 2925
- Joined: Sat Mar 26, 2016 3:48 pm
- Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
- Location: U.S.A.
Re: Vbits and Text Examples
Bullet Holes ???
I believe she is beyond 'mad' she is looking for BLOOD!!!
LOL!
Sharkcutup
I believe she is beyond 'mad' she is looking for BLOOD!!!
LOL!
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.004
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.004