Good afternoon
How can I change the position of the model in the workipiece once the project has been created?
I do delete all and restart?
thanks
Modify material position
Modify material position
Remenber ! A good sharp for a good mill!
-
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 21, 2009 8:22 pm
- Model of CNC Machine: ShopBot Buddy Standard
- Location: Marietta, GA.
Re: Modify material position
Double click on the model and you will see a set of "Handles" grab the center one and move the model where you want it. You can also resize the model up or down with the upper left handle and hold "Shift" and stretch or shrink...joe
- Adrian
- Vectric Archimage
- Posts: 14657
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Modify material position
If you want to move it precisely you can also press the M key and enter absolute or relative co-ordinates.
Re: Modify material position
thank you at all
the last question; if I want to move on Z axis?
see image
thanks
the last question; if I want to move on Z axis?
see image
thanks
Remenber ! A good sharp for a good mill!
- Adrian
- Vectric Archimage
- Posts: 14657
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Modify material position
Z is basically the thickness of the part. You can't do undercuts so you can't have a piece off the base.