Coconut Palm

This forum is for users to post tips and tricks they have found useful while working with VCarve Pro
Post Reply
powair7s
Vectric Apprentice
Posts: 55
Joined: Wed Mar 08, 2017 12:54 am
Model of CNC Machine: Home Build

Coconut Palm

Post by powair7s »

20180114_181944.jpg
Has anyone tried milling coconut palm? I tried today and it didin't turn out well. I used a .25" EM at 40 IPM and a cut depth of .125". Have any of you had success with a different bit? I was trying to do a Prism but any narrow pieces chip off. See the photo below.

User avatar
dhellew2
Vectric Wizard
Posts: 1322
Joined: Thu May 22, 2008 10:14 pm
Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
Location: Royal City Washington

Re: Coconut Palmhttp://forum.vectric.com/viewforum.php?f=3

Post by dhellew2 »

Coconut palm is very brittle.
I've had good luck using 3-flute spiral solid carbide bits [www.cuttingtoolsource.com]
I run rpms at 18-22,000 and feed rate 40-50
When possible avoid square corner cuts that go across the grain, if possible extend the cuts past the corner
This works with red oak too
You can do this by making cross cuts first [use layers so you can create separate tool paths]
If 3d carving try to follow the grain just like you would on a planer, jointer, or hand plane [avoid running the cutter cutting into the end of the grain]
If your wood is really dry you may need to first soak with wood hardener, peg, penetrating sealer, or etc.
I sometimes dilute wood hardener so it dries slower and penetrates deeper
Good Luck, the character of the wood is worth the effort
Dale
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Coconut Palm

Post by Rcnewcomb »

If your wood is really dry you may need to first soak with wood hardener, peg, penetrating sealer, or etc.
I sometimes dilute wood hardener so it dries slower and penetrates deeper
That is great advice and well worth the time for certain woods.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

powair7s
Vectric Apprentice
Posts: 55
Joined: Wed Mar 08, 2017 12:54 am
Model of CNC Machine: Home Build

Re: Coconut Palm

Post by powair7s »

Wow thanks for the great advice. I will certainly look into the wood hardener.

So on my cutting use more of a raster path to cut along the direction I want to avoid spintering?

Have any pictures of your coconut palm projects?

I also picked up some leopard wood, purple heart and padauk. The place I went had 140 different species, it was pretty awesome.

wbrock
Posts: 19
Joined: Wed Oct 25, 2017 8:19 pm
Model of CNC Machine: piranha fx

Re: Coconut Palm

Post by wbrock »

i'm by no means a wood expert, more of a wood collector and I've never heard of coconut palm, i know different wood will go by different name in different regions. I have heard of red palm and black palm. Red palm comes from coconut trees and black palm is from a type of grass cluster. To me it looks like you have black palm. if that is the case then it will be next to impossible to keep it from splintering.

Savannahdan
Vectric Wizard
Posts: 520
Joined: Sun May 03, 2015 12:25 pm
Model of CNC Machine: Axiom AR8
Location: Savannah, GA

Re: Coconut Palm

Post by Savannahdan »

wbrock, You might want to do a search regarding Coconut Palms. As to working with palms, a trick I used for turning these for pens was to use superglue. It also works wonders on corncob pen blanks. Be sure to have plenty of ventilation.

powair7s
Vectric Apprentice
Posts: 55
Joined: Wed Mar 08, 2017 12:54 am
Model of CNC Machine: Home Build

Re: Coconut Palm

Post by powair7s »

Superglue in what way?

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Coconut Palm

Post by Adrian »

Used to do that when turning spalted beech. Soak the wood in superglue, let it dry and then machine. A less smelly and cheaper way is to use a wood hardener meant for rotted wood.

Post Reply