VCarve Patterns for making carved trim moldings

This forum is for users to post tips and tricks they have found useful while working with VCarve Pro
Post Reply
Fleming
Vectric Wizard
Posts: 400
Joined: Tue Oct 28, 2008 3:41 pm

VCarve Patterns for making carved trim moldings

Post by Fleming »

In researching and designing for an upcoming furniture making project I re-created these historical patterns for making moldings. All the patterns are "repeatable" so you can make them any length you want. You can download the files from my dropbox account if you wish.

https://www.dropbox.com/sh/xhn2wov3on9u ... TZ2ta?dl=0
Trim Patterns
Trim Patterns
Happy Carving!

Paul

joeporter
Vectric Wizard
Posts: 519
Joined: Tue Jul 21, 2009 8:22 pm
Model of CNC Machine: ShopBot Buddy Standard
Location: Marietta, GA.

Re: VCarve Patterns for making carved trim moldings

Post by joeporter »

Thanks, Paul. These are very nice, just what I was looking for myself. Will wind up on a blanket chest project I have planned. Thanks again....joe

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: VCarve Patterns for making carved trim moldings

Post by highpockets »

Thanks Paul for sharing. Great work, I know these will make their way into some of my projects.
John
Maker of Chips

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: VCarve Patterns for making carved trim moldings

Post by scottp55 »

Thanks for the files Paul!
I'm sure they'll be used:)
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

User avatar
Craig Thompson
Vectric Apprentice
Posts: 57
Joined: Sun Jun 12, 2016 5:11 pm
Model of CNC Machine: Laguna Swift 4x4
Location: Amherst Texas

Re: VCarve Patterns for making carved trim moldings

Post by Craig Thompson »

Thanks you Paul. I'm sure I can use them. Thanks again.

Craig :D

Bob Reda
Vectric Wizard
Posts: 858
Joined: Wed Aug 16, 2006 7:34 pm
Model of CNC Machine: shopbot 48x48 upgraded prt
Location: Monessen, Pa
Contact:

Re: VCarve Patterns for making carved trim moldings

Post by Bob Reda »

Thank you Paul, very nice work

Bob

beone
Posts: 2
Joined: Fri Jul 17, 2009 10:44 pm

Re: VCarve Patterns for making carved trim moldings

Post by beone »

Thanks

Dave

vgraves
Vectric Craftsman
Posts: 122
Joined: Sat Sep 29, 2012 2:04 am
Model of CNC Machine: CNC Router Parts PRO4848 w/LinuxCNC
Location: Knoxville, TN

Re: VCarve Patterns for making carved trim moldings

Post by vgraves »

Thanks for the files.

Samson
Vectric Wizard
Posts: 322
Joined: Fri May 02, 2014 10:14 pm
Model of CNC Machine: 4x4

Re: VCarve Patterns for making carved trim moldings

Post by Samson »

Those look nice. Can you save them for use in V8.5?
I, as well as others I'm sure, are unable to use these, since they are saved in V9.
I would appreciate it, if it's possible.

Fleming
Vectric Wizard
Posts: 400
Joined: Tue Oct 28, 2008 3:41 pm

Re: VCarve Patterns for making carved trim moldings

Post by Fleming »

Samson,

I am not able to save as an "older" version but I have uploaded both a pdf and dxf of the vectors to that dropbox folder which you should be able to import into your software. Hope this helps. If that doesn't work let me know and we can try something else.

Paul

Post Reply