Page 1 of 1
Bumpy 3D image
Posted: Mon Nov 27, 2017 8:54 pm
by danielbaker7
My design has bumps where I believe it should be smooth. Other parts look great. It is a v3m file from Design&Make. I used a 90 degree bit.
Thoughts?
Re: Bumpy 3D image
Posted: Mon Nov 27, 2017 8:59 pm
by Adrian
The files are designed to be cut with a 1/8" ballnose bit. Using a 90 degree v-bit could give odd results depending on the stepover.
Re: Bumpy 3D image
Posted: Wed Dec 06, 2017 3:42 am
by martin54