Imports Taller

This forum is for users to post tips and tricks they have found useful while working with VCarve Pro
Post Reply
ger.wat
Posts: 18
Joined: Mon Oct 30, 2017 10:03 pm
Model of CNC Machine: ShopBot PRSAlpha
Location: Northwest Washington

Imports Taller

Post by ger.wat »

Created a Z=1" thick Door Panel Y=47.5; X=81.6 with SolidWorks, all flat with a few divots.
Saved as STL
Import to VcarvePro
When open roughing tool path it says the model Z=1.87, that the model rises .87" above material.

What's going on here and do I loose pattern height when adjusting to 1"?
How do I control this?

Jerry

Post Reply