Imports Taller
Posted: Tue Nov 21, 2017 12:27 am
Created a Z=1" thick Door Panel Y=47.5; X=81.6 with SolidWorks, all flat with a few divots.
Saved as STL
Import to VcarvePro
When open roughing tool path it says the model Z=1.87, that the model rises .87" above material.
What's going on here and do I loose pattern height when adjusting to 1"?
How do I control this?
Jerry
Saved as STL
Import to VcarvePro
When open roughing tool path it says the model Z=1.87, that the model rises .87" above material.
What's going on here and do I loose pattern height when adjusting to 1"?
How do I control this?
Jerry