Carving King Plastics Color Core with Vcarve

This forum is for users to post tips and tricks they have found useful while working with VCarve Pro

Carving King Plastics Color Core with Vcarve

Postby johnelle » Tue Aug 08, 2017 3:41 pm

I have to do some outdoor trail maps so I carving them on King Color Core. All their "tips" are for folks using big industrial CNC machines. Just wondering if anybody has experience doing this with Vcarve / desktop CNC machine. For example in their video they are showing flat bottom letters carved with a very small v engraving bit. Never done this is Varve. The letters were always actual V or raised letters in a pocket. This is almost like every letter is a pocket.

(the rationale is this is layered product where you machine away the top layer revealing a different color "core")
Posts: 31
Joined: Thu May 25, 2017 7:23 pm
Model of CNC Machine: Shapeoko 3

Re: Carving King Plastics Color Core with Vcarve

Postby Adrian » Tue Aug 08, 2017 3:57 pm

For the thinner versions or small letters I pocket out the letters with the pocket toolpath and a 3mm straight bit. For thicker I use a VCarve toolpath with the flat option checked using a 90 degree v-bit and a 6 or 3mm clearance bit.
User avatar
Vectric Archimage
Posts: 8601
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Return to VCarve - Tips and Tricks

Who is online

Users browsing this forum: No registered users and 6 guests