simple wood pickets
-
- Vectric Craftsman
- Posts: 211
- Joined: Wed Sep 17, 2014 6:53 am
- Model of CNC Machine: Omnitech 4X8 with 8 tool
simple wood pickets
i am still very new with vcarve pro.
i need a help to make the attached Pickets from a pine or soft wood.
i have tried to create line or box and could not figure out as how to shape the shape as you see it.
please help
Thank you.
- Rcnewcomb
- Vectric Archimage
- Posts: 5886
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: simple wood pickets
Watch the video tutorial called "Image to Vector Logo". Then let us know what particular step is causing troubles.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- Mike-S
- Vectric Wizard
- Posts: 1123
- Joined: Mon Jun 13, 2011 6:45 am
- Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)
- Location: Hayesville, NC
Re: simple wood pickets
After you use the chicken to create vectors, you need to rotate the picket to horizontal and do a little node editing and then fit curves to vectors. Then I'd throw away 3 of the four quadrants as they are distorted in the original picture. Copy the one good one and join back into a full design.