Can someone please post the procedure on how to use VCarve with Universal G-Code Sender? I have tred the G-Code post processor as well as a few others and they just made my X-Carve go funky.
What post-processor/settings should I be using?
Thanks!!
Universal G-Code Sender?
-
- Vectric Wizard
- Posts: 1592
- Joined: Sun Sep 16, 2007 2:59 pm
- Model of CNC Machine: Custom DIY
- Location: Lake St Clair, MI, USA
- Contact:
Re: Universal G-Code Sender?
Probably the grbl post processor.
Gerry - http://www.thecncwoodworker.com
- jglazer
- Vectric Apprentice
- Posts: 75
- Joined: Sat Oct 08, 2016 3:37 pm
- Model of CNC Machine: X-Carve 1000x1000
Re: Universal G-Code Sender?
Really? Not the g-code ones? I didn't see GRBL but I didn't look for one.
- jglazer
- Vectric Apprentice
- Posts: 75
- Joined: Sat Oct 08, 2016 3:37 pm
- Model of CNC Machine: X-Carve 1000x1000
Re: Universal G-Code Sender?
Well the GRBL export is close and I can sorta see my carving but its no where near useful. Any other ideas?
-
- Vectric Wizard
- Posts: 1592
- Joined: Sun Sep 16, 2007 2:59 pm
- Model of CNC Machine: Custom DIY
- Location: Lake St Clair, MI, USA
- Contact:
Re: Universal G-Code Sender?
Define "no where near useful"?
As far as I know, Universal G-Code Sender is running GRBL, so a GRBL post should work.
What's the problem?
As far as I know, Universal G-Code Sender is running GRBL, so a GRBL post should work.
What's the problem?
Gerry - http://www.thecncwoodworker.com
-
- Vectric Craftsman
- Posts: 185
- Joined: Thu May 14, 2015 12:29 am
- Model of CNC Machine: AVID PRO-Acorn , Shapeoko SO3 XXL & SO3s
- Location: Colorado
- Contact:
Re: Universal G-Code Sender?
in V-Carve 8.5, there are two X-Carve PP's, one Inch, one MM. Try those and see if it resolves the issues.
- jglazer
- Vectric Apprentice
- Posts: 75
- Joined: Sat Oct 08, 2016 3:37 pm
- Model of CNC Machine: X-Carve 1000x1000
Re: Universal G-Code Sender?
Thanks Elevation, I never thought to scroll down and look for "X". Yes this works fine. The GRBL one is screwy but the X-Carve PP was perfect. Thanks for pointing me to the obvious!