Hello all,
I'm having difficulty creating a dish with text that remains full height of the material. I have it all almost figured out.. except I just can't get the HM Print Design part to remain uncarved and at full surface height.
Any ideas would be greatly appreciated.
3D Text in a Dish
- HMPrintDesign
- Posts: 16
- Joined: Fri Jul 08, 2016 10:04 pm
- Model of CNC Machine: X-Carve 1000
- Location: Richfield Springs, NY
- Contact:
3D Text in a Dish
Thank you,
Stephen and Wayne Hesler-Mondore
HM Print and Design
hmprintdesign.com
Stephen and Wayne Hesler-Mondore
HM Print and Design
hmprintdesign.com
- Xxray
- Vectric Wizard
- Posts: 2304
- Joined: Thu Feb 17, 2011 8:47 am
- Model of CNC Machine: CAMaster Stinger 1
- Location: MI USA
Re: 3D Text in a Dish
Take a look at this thread might help, I made oval dish plaques with raised letters
http://forum.vectric.com/viewtopic.php? ... 08#p179208
http://forum.vectric.com/viewtopic.php? ... 08#p179208
Doug
-
- Vectric Wizard
- Posts: 669
- Joined: Thu Apr 15, 2010 10:03 pm
- Model of CNC Machine: SHOPBOT BUDDY PRS 32, 4 FT PWR STICK
- Location: SOUTH CENTRAL COLORADO
Re: 3D Text in a Dish
Unless I am missing something, its just a matter of raising your base height up. But in this example of a bowl that is restricted to .5 inch deep, the lettering is .5 inches tall. In my opinion too tall.