Pocket and Carving first pass slower

This forum is for users to post tips and tricks they have found useful while working with VCarve Pro

Pocket and Carving first pass slower

Postby SteveMI » Tue Apr 12, 2016 11:26 pm

When pocketing or carving, for the first raster outside cycle the full cutter is in the wood. Using a step-over in pocketing or carving, the amount of material is reduced sometimes 90% for each successive cycle.

Is there any way to set the feed rate so the first full raster cutter cut it is one speed and the following a different feed rate?

I've considered manually modifying the g-code or doing a non-raster cut to the final depth first at the slower feed rate and then using a faster feed rate for the pocketing.

(I couldn't find an earlier answer, but if there is one please give me a link.)

Steve.
SteveMI
 
Posts: 17
Joined: Sat Nov 10, 2012 6:41 pm
Model of CNC Machine: Debecee

Return to VCarve - Tips and Tricks

Who is online

Users browsing this forum: No registered users and 3 guests