Hi.
Is there a way to do convex curved flutes as opposed to concave flutes?
Sorry if I've missed it - it's a logical variation and probably useful to more souls than mine.
Thanks, Rob.
fluting ramping
- adze_cnc
- Vectric Wizard
- Posts: 4381
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: fluting ramping
Just running some scenarios through my imagination I suspect some 2D spiral would need to be used so that the helix the fluting toolpath would generate would be a "convex" surface.
- Rcnewcomb
- Vectric Archimage
- Posts: 5932
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: fluting ramping
The moulding toolpath might be a better choice.Is there a way to do convex curved flutes as opposed to concave flutes?
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- FixitMike
- Vectric Wizard
- Posts: 2177
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Re: fluting ramping
If you embed a Clipart 3D tab circular tab in your material, using the empty upside down U for the combine mode, draw the line you want to flute along, and then use the profile tool path, selecting the line and the model, and then click the "Project toolpath onto 3D model" box, you can get a convex "fluting" tool path cut.
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: fluting ramping
I'm with Randall, the Moulding Toolpath would allow for infinite options.
John
Maker of Chips
Maker of Chips
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: fluting ramping
Here's another method. If you have VCP 10 you can use the new Levels Clipping option.
John
Maker of Chips
Maker of Chips
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro