My first test cut part with Aspire!

Post by **Greasetattoo** » Fri Nov 28, 2008 5:16 pm

Hey all,
Just did a test model and cutting with a piece of scrap walnut I had..
May use it, in a upcoming project!
Nothing real big, but eh, it was my first with Aspire!

Enjoy!

Post by **js11110** » Fri Nov 28, 2008 7:08 pm

Good job!

Jason

Post by **RoutnAbout** » Fri Nov 28, 2008 7:23 pm

Grease, That looks really good in that walnut!

Post by **Phil** » Sat Nov 29, 2008 12:40 am

Nice, Grease. Can we have some details - size, cutter used, stepover? Thanks

Post by **JamesB** » Sat Nov 29, 2008 1:53 am

Who says you "Can't get no satisfaction" - excellent first project.
cheers,
James

Post by **Greasetattoo** » Sat Nov 29, 2008 3:59 pm

Hey Phil,

I used my trusty Beckwith's bits!
http://www.beckwithdecor.com/index_files/Cutters.htm

Roughing I used .025 stepover .288 28%
Finishing I used .0625 stepover .113 18.1%

Post by **lstovall** » Sat Nov 29, 2008 4:13 pm

Nice going Grease, looks great!

Post by **Greasetattoo** » Sat Nov 29, 2008 4:56 pm

Thanks all..

Hey Marv,
I have yet to hook the machine up yet.
But, buy the end of the month (December), hope to have it running...

I am going to start a little sign business and pay for the machine and my Aspire upgrade!

Then I will be able to do bigger!

I will let you know, when the chips start flying

Post by **lstovall** » Sat Nov 29, 2008 4:59 pm

Sounds great! If I can help, let me know.

Vectric Customer

My first test cut part with Aspire!

My first test cut part with Aspire!

Re: My first test cut part with Aspire!

Re: My first test cut part with Aspire!

Re: My first test cut part with Aspire!

Re: My first test cut part with Aspire!

Re: My first test cut part with Aspire!

Re: My first test cut part with Aspire!

Re: My first test cut part with Aspire!

Re: My first test cut part with Aspire!