First Post
First Post
Excuse for my bad English, im from Flanders, Belgium
Grts, G-Sign
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: First Post
Very NICE job....And Welcome!!
scott
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Rcnewcomb
- Vectric Archimage
- Posts: 5915
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: First Post
Welkom bij de groep!Flanders, Belgium
Bienvenue dans le groupe!
Willkommen!
Je Engels is beter dan mijn Nederlands
Your English is better than my Dutch.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Vectric Wizard
- Posts: 409
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: First Post
Welcome! Your English is great and your sign is awesome. Very nicely done.
Looking forward to seeing more of your work.
Looking forward to seeing more of your work.
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: First Post
Super Job auf der Ausrüstung.G-Sign wrote:Hello, this is my first post
Excuse for my bad English, im from Flanders, Belgium
Grts, G-Sign
Und willkommen im Forum.
Thanks,
Jim
Jim
- TReischl
- Vectric Wizard
- Posts: 4645
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: First Post
Very very nice indeed!
(Us folks who speak English as our native language usually speak it badly)
(Us folks who speak English as our native language usually speak it badly)
"If you see a good fight, get in it." Dr. Vernon Johns
-
- Posts: 28
- Joined: Tue Aug 22, 2017 5:30 pm
- Model of CNC Machine: Shopbot Buddy
- Location: Frankenmuth, MI
Re: First Post
Very cool, how did you get that "rusted iron" finish?
Re: First Post
Hi,
It is a structure from a Photo of rust Iron,
In aspire i created a structured component from the photo
and paint it with 4 diffirent "rust" colours, acrylic paint
Grts, G-sign
It is a structure from a Photo of rust Iron,
In aspire i created a structured component from the photo
and paint it with 4 diffirent "rust" colours, acrylic paint
Grts, G-sign