Couple of Christmas Presents
-
- Vectric Wizard
- Posts: 409
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Couple of Christmas Presents
Here are some gifts for this Christmas for family and friends. I made three of Michael Tylers wonderful Christmas sled, slightly modified. The piano cutting board is all hand made...no cnc used (is that legal on this forum? )
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Mar 27, 2013 4:16 pm
- Model of CNC Machine: CNC Shark Pro Plus
- Contact:
Re: Couple of Christmas Presents
The sled came out great and the cutting board is top rate awesome! Thanks for posting!
BillK
https://www.facebook.com/CarvingsByKurtz
https://www.facebook.com/CarvingsByKurtz
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Couple of Christmas Presents
Very, very nice!! Great mod on the sled and the cutting board is off the chart! My wife and I both play keyboards - we should have a keyboard cutting board - why didn’t I think of that?!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
Re: Couple of Christmas Presents
Excellent work.
Gotta make me one or two of those sleds they're awesome
Well Done
Regards
C
Gotta make me one or two of those sleds they're awesome
Well Done
Regards
C
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Couple of Christmas Presents
Love both of them Joe!!
Going to be some Happy people!!
Great work Joe!
scott
Going to be some Happy people!!
Great work Joe!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Wizard
- Posts: 409
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: Couple of Christmas Presents
Thanks for the kind comments!
I'd be happy to post the pdf plains for the cutting board if anyone is interested./
I'd be happy to post the pdf plains for the cutting board if anyone is interested./
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Couple of Christmas Presents
That would be great - thank you!Holzarbeiter wrote:Thanks for the kind comments!
I'd be happy to post the pdf plains for the cutting board if anyone is interested./
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Wizard
- Posts: 409
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: Couple of Christmas Presents
Well.....I have egg on my face. The fine print on the file says it may not be shared, copied, etc etc. I did buy the plans but did not realize they are copy protected.
My apologies for jumping the gun.
My apologies for jumping the gun.
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Couple of Christmas Presents
No problem at all! Thank you for doing the right thing!!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- meflick
- Vectric Craftsman
- Posts: 106
- Joined: Tue Dec 05, 2017 3:41 pm
- Model of CNC Machine: Shark HD4
- Location: East TN - USA
Re: Couple of Christmas Presents
Beautiful projects,
While you cannot share the actual PDF file for the keyboard cutting board, you could share a link to where to buy the file it’s self. I am sure the owner/seller would appreciate that as well.
While you cannot share the actual PDF file for the keyboard cutting board, you could share a link to where to buy the file it’s self. I am sure the owner/seller would appreciate that as well.
-
- Vectric Wizard
- Posts: 409
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: Couple of Christmas Presents
Thank you! Sheesh....I never thought about posting the link...DUH. So, thanks again!meflick wrote:Beautiful projects,
While you cannot share the actual PDF file for the keyboard cutting board, you could share a link to where to buy the file it’s self. I am sure the owner/seller would appreciate that as well.
https://www.woodstore.net/Keyboard-Cutt ... -01135.htm
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
-
- Vectric Wizard
- Posts: 520
- Joined: Sun May 03, 2015 12:25 pm
- Model of CNC Machine: Axiom AR8
- Location: Savannah, GA
Re: Couple of Christmas Presents
Beautiful presents.
-
- Vectric Wizard
- Posts: 409
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: Couple of Christmas Presents
Thank you kindly.Savannahdan wrote:Beautiful presents.
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
- meflick
- Vectric Craftsman
- Posts: 106
- Joined: Tue Dec 05, 2017 3:41 pm
- Model of CNC Machine: Shark HD4
- Location: East TN - USA
Re: Couple of Christmas Presents
No worries, we all have moments. I have plenty. thanks for sharing the link. I will check it out as we have several musicians in the family.Holzarbeiter wrote:Thank you! Sheesh....I never thought about posting the link...DUH. So, thanks again!meflick wrote:Beautiful projects,
While you cannot share the actual PDF file for the keyboard cutting board, you could share a link to where to buy the file it’s self. I am sure the owner/seller would appreciate that as well.
https://www.woodstore.net/Keyboard-Cutt ... -01135.htm