Drew this in pencil years ago, when I just dreamed of having A CNC Machine.
Vectrorized it couple of years ago used it for a paint mask.
Cut it on my CNC machine a few days ago.
Oak, clear coat, 4 in tall X 7.5 in wide.
Love my CNC.
mark-s
Celtic Design
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Celtic Design
And I thought it took me a long time to get things done
Nice design and finished job!
Thanks for sharing....
Nice design and finished job!
Thanks for sharing....
John
Maker of Chips
Maker of Chips
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: Celtic Design
Now trace the centers of your design to create three closed loops - and then use the Extrude and Weave tool to create a 2.5d half circle shaped Celtic Knot weave from your design. More fun with Aspire. You can also extrude the border shape into a half circle.
CarveOne
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Celtic Design
Nice Mark...being able take a sketch or file...and then at the end of the day hold it in your hands!!
Definitely one of the NICE feelings!
Good clean cut as usual! (THAT says something right there:)
(I have pencil sketch of an entertainment tower on a piece of the floor protecting paper when closing in the house...22 years and it's STILL a sketch....Faster than me)
scott
Definitely one of the NICE feelings!
Good clean cut as usual! (THAT says something right there:)
(I have pencil sketch of an entertainment tower on a piece of the floor protecting paper when closing in the house...22 years and it's STILL a sketch....Faster than me)
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA