floor medallion

This is the place to post images of work produced using Aspire

floor medallion

Postby nicksilva » Sat Aug 10, 2019 4:14 am

this was all laid out in Aspire. 24" diameter. inlay woods include Maple, Mesquite, walnut, white oak and Santos Mahogany and assembled from the inside out. It was pretty tight and only had to hand sand/fit the point where the point meets the center of the white oak which was routed with a 1/16 bit first but it's still impossible to get a sharp corner with a round endmill. This was tons of fun.

"Out of my mind. Back in 5 Minutes."
Vectric Craftsman
Posts: 258
Joined: Thu Aug 21, 2014 8:13 pm
Location: Dallas, TX USA
Model of CNC Machine: ULS M300, Rockler 60th Ann. Shark

Re: floor medallion

Postby mickecarlsson » Sat Aug 10, 2019 7:58 am

Posts: 36
Joined: Tue Feb 06, 2018 9:18 pm
Location: Skane, Sweden
Model of CNC Machine: CNC 6040, Vectric Aspire

Re: floor medallion

Postby scottp55 » Sat Aug 10, 2019 12:49 pm

LIKING it Nick!! :)
User avatar
Vectric Wizard
Posts: 3067
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10

Re: floor medallion

Postby garylmast » Sat Aug 10, 2019 1:18 pm

I like it. Nice job.
Vectric Wizard
Posts: 979
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Re: floor medallion

Postby mtylerfl » Sat Aug 10, 2019 3:00 pm

Man, that looks so NICE! Excellent!
Michael Tyler



-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
Vectric Wizard
Posts: 4051
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: floor medallion

Postby SteveNelson46 » Sat Aug 10, 2019 4:19 pm

You sure did a nice job. From the picture it looks perfect.
User avatar
Vectric Wizard
Posts: 545
Joined: Wed Jan 04, 2012 2:43 pm
Location: Tucson, Az.
Model of CNC Machine: Camaster Stinger with Recoil Lathe

Re: floor medallion

Postby armbrusterco » Sat Aug 10, 2019 11:11 pm

That will look fabulous in the floor.

We retired and downsized into a home that already had beautiful inlays set into the oak floor of four rooms. I enjoy them every day.
Bob Armbruster
Vectric Craftsman
Posts: 125
Joined: Tue Feb 14, 2012 5:26 am
Location: Lake Barrington, IL
Model of CNC Machine: Roland MDX-40A

Re: floor medallion

Postby Stephanie Downing » Mon Aug 12, 2019 2:51 pm

WOW! This is incredible Nick.

You must be so proud of the finished result. Thanks for sharing!
Stephanie Downing
Vectric Staff
Posts: 170
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: floor medallion

Postby TReischl » Mon Aug 12, 2019 4:45 pm

Really well done.

Floor medallions are not a cheap item by a long shot.
"If you see a good fight, get in it." Dr. Vernon Jones
User avatar
Vectric Wizard
Posts: 2868
Joined: Thu Jan 18, 2007 6:04 pm
Location: Leland NC
Model of CNC Machine: 8020 Build 48X36X10 RP 2010 Screenset

Re: floor medallion

Postby highpockets » Thu Aug 15, 2019 6:49 pm

Beautiful, great craftsmanship.

Thanks for sharing.
Maker of Chips
User avatar
Vectric Wizard
Posts: 2432
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: floor medallion

Postby Ferry Winkler » Tue Aug 27, 2019 3:43 pm

My favourite kind of work, greatly excecuted.
Now up to the even more detailed inlay designs like they use to do in the French furnitures from 250 years ago :-)
Erik Winkler
Handcrafts with old and new techniques.
Ferry Winkler
Posts: 26
Joined: Thu Nov 10, 2016 10:40 am
Location: Diemen Nederland Europe
Model of CNC Machine: MultiCam3000

Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 9 guests