CUBS DUGOUT

This is the place to post images of work produced using Aspire

CUBS DUGOUT

Postby dwilli9013 » Fri May 17, 2019 3:43 pm

Well a few weeks back there was quite a bit of chatter about poplar and its carving ability.
Seeing as my last trip to Owl Hardwoods netted me a considerable amount of someone elses Poplar order I decided to give it a run.
Overall I was quite impressed with how this species carved. First picture is straight off of the machine. Just a quick brushing with a stiff bristled brush and it was ready for a sealer coat before paint. It does have a slightly green tint when viewed unfinished but nothing that would prohibit me from using it.

Sign is for a nephews bedroom door. Whole family die hard cubs fans.
Material Poplar 16"x10-1/2" x 5/8" thick.
Logo & Lettering V-Carve with 60 deg Amana insert tooling 1/4" shank.
Figures and inset groove Profile cut on the line with 30 deg chinesium v-bit 1/8" shank.
Profile cutout 1/8" End Mill.

Initial seal with rattle can shellac 2 coats.
Paints all Acrylic Cobalt Blue, Brilliant Red and Titanium White.
Black spray ink on figures and border inset.
Final finish 3 layers of rattle can lacquer with light sand in between coats. Being mindfull of painted areas.

All in all a fun little project to satisfy my curiosity about poplar.
Jury says it is viable and I will incorporate it into some future projects.

Thanks for looking. Peace.
Attachments
20190514_215905.jpg
20190517_0613541.jpg
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 1229
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built

Re: CUBS DUGOUT

Postby mark-s » Fri May 17, 2019 4:00 pm

Very nice, like it.
mark-s
mark-s
Vectric Apprentice
 
Posts: 177
Joined: Sat Feb 03, 2018 2:03 am
Location: So. Cal.
Model of CNC Machine: diy 4 X 4 CNC Router

Re: CUBS DUGOUT

Postby TReischl » Fri May 17, 2019 4:12 pm

Nicely done.

Mannnn, I miss OWL Hardwoods. REALLY miss them. I keep mentioning to my wife that I might make a trip to the Chicago area just to visit Portillo's, OWL Lumber and Tasty Dawg up in Rockford. Well ok, I might just have to stop in at Berland's World of Tools while I am at it.
"If you see a good fight, get in it." Dr. Vernon Jones
User avatar
TReischl
Vectric Wizard
 
Posts: 2907
Joined: Thu Jan 18, 2007 6:04 pm
Location: Leland NC
Model of CNC Machine: 8020 Build 48X36X10 RP 2010 Screenset

Re: CUBS DUGOUT

Postby WNC_Ed » Fri May 17, 2019 4:30 pm

Looks great!
Theo will love it!
Congrats on a project well done!

As for Poplar on the CNC, my perception is unchanged from the router table it is better to work with than pine, but not nearly as nice to work as the hardwoods.
Maker of sawdust
User avatar
WNC_Ed
Vectric Craftsman
 
Posts: 254
Joined: Fri Dec 07, 2018 5:56 pm
Location: Western North Carolina - Heart of the Smokies
Model of CNC Machine: Shark HD4 AXYZ 4010

Re: CUBS DUGOUT

Postby dwilli9013 » Fri May 17, 2019 4:35 pm

TReischl wrote:Nicely done.

Mannnn, I miss OWL Hardwoods. REALLY miss them. I keep mentioning to my wife that I might make a trip to the Chicago area just to visit Portillo's, OWL Lumber and Tasty Dawg up in Rockford. Well ok, I might just have to stop in at Berland's World of Tools while I am at it.



Thanks Ted,
Yeah good call on all of those other than Tasty Dawg in Rockford. They closed a few years ago. We do now finally have a portillos in Rockford. And a new Dog Haus opened in an old Ruby Tuesdays.
Love the Owl store but wish it was a bit bigger and closer to Rockford. I have also been going to the Hardwood Connection in Sycamore Ill. Good selection just not as many exotics.
:lol: :lol: :lol:
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 1229
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built

Re: CUBS DUGOUT

Postby woody53 » Sat May 18, 2019 2:45 pm

Looks Great Dwayne . I think poplar from a lumber company is Alot better than box store poplar. I did a graduation gift for my niece out of poplar and off the machine needed almost nothing. Maybe we are Lucky :D .

Dave
Attachments
trinity sign.jpg
woody53
Vectric Wizard
 
Posts: 303
Joined: Sat Jun 11, 2011 3:27 pm
Location: Jefferson City, Mo.
Model of CNC Machine: Probotix Meteor 25 x 50


Return to Aspire - Gallery

Who is online

Users browsing this forum: Google [Bot] and 9 guests