Beach scenes
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Mar 27, 2013 4:16 pm
- Model of CNC Machine: CNC Shark Pro Plus
- Contact:
Beach scenes
Finally got to cut these two models I created a while ago. The wood was from a thin cheery slab that I bought a few years ago. The scenes are from a beach in Maine that we go to. Created with Aspire, these are wall hangings. Thanks for looking.
BillK
https://www.facebook.com/CarvingsByKurtz
https://www.facebook.com/CarvingsByKurtz
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Beach scenes
Nice detail Bill!
Liking the funky rustic Cherry too!!
It's not tickling any grey cells though....Whereabouts be that at?
Next time you go up....maybe a small detour off the Kennebunk exit?
Good work on bringing out the color of the Cherry.
scott
Liking the funky rustic Cherry too!!
It's not tickling any grey cells though....Whereabouts be that at?
Next time you go up....maybe a small detour off the Kennebunk exit?
Good work on bringing out the color of the Cherry.
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Mar 27, 2013 4:16 pm
- Model of CNC Machine: CNC Shark Pro Plus
- Contact:
Re: Beach scenes
Scott,
Haha, not far from you, Wells Beach, the smaller one is close to public way no. 2, where we usually end up. I never noticed that you are in Kennebunkport!
Haha, not far from you, Wells Beach, the smaller one is close to public way no. 2, where we usually end up. I never noticed that you are in Kennebunkport!
BillK
https://www.facebook.com/CarvingsByKurtz
https://www.facebook.com/CarvingsByKurtz
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Beach scenes
Jeez...a whole 2 towns away
If you ever want to see a small messy shop...drop by:)
If water on beaver dam isn't to high...borrow my saws and cut us a couple chunks of dead Apple trees on the far side?
If you ever want to see a small messy shop...drop by:)
If water on beaver dam isn't to high...borrow my saws and cut us a couple chunks of dead Apple trees on the far side?
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Mar 27, 2013 4:16 pm
- Model of CNC Machine: CNC Shark Pro Plus
- Contact:
Re: Beach scenes
Thanks Scott, haven't carved apple yet, made some tasty ribs with some once though.
BillK
https://www.facebook.com/CarvingsByKurtz
https://www.facebook.com/CarvingsByKurtz