Beach scenes

This is the place to post images of work produced using Aspire
Post Reply
BillK
Vectric Wizard
Posts: 594
Joined: Wed Mar 27, 2013 4:16 pm
Model of CNC Machine: CNC Shark Pro Plus
Contact:

Beach scenes

Post by BillK »

Finally got to cut these two models I created a while ago. The wood was from a thin cheery slab that I bought a few years ago. The scenes are from a beach in Maine that we go to. Created with Aspire, these are wall hangings. Thanks for looking.
20190511_194146374_iOS (2).jpg
20190510_203027817_iOS (2).jpg
20190511_194137559_iOS (2).jpg
BillK
https://www.facebook.com/CarvingsByKurtz

User avatar
scottp55
Vectric Wizard
Posts: 4716
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Beach scenes

Post by scottp55 »

Nice detail Bill!
Liking the funky rustic Cherry too!! :)
It's not tickling any grey cells though....Whereabouts be that at? :)
Next time you go up....maybe a small detour off the Kennebunk exit?
Good work on bringing out the color of the Cherry.
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

BillK
Vectric Wizard
Posts: 594
Joined: Wed Mar 27, 2013 4:16 pm
Model of CNC Machine: CNC Shark Pro Plus
Contact:

Re: Beach scenes

Post by BillK »

Scott,

Haha, not far from you, Wells Beach, the smaller one is close to public way no. 2, where we usually end up. I never noticed that you are in Kennebunkport!
BillK
https://www.facebook.com/CarvingsByKurtz

User avatar
scottp55
Vectric Wizard
Posts: 4716
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Beach scenes

Post by scottp55 »

Jeez...a whole 2 towns away :D
If you ever want to see a small messy shop...drop by:)
If water on beaver dam isn't to high...borrow my saws and cut us a couple chunks of dead Apple trees on the far side? :)
Attachments
4.27.19 POND AFTER 2 INCHES RAIN SEE LOG RIGHT.jpg
5.10.18 Dad's Chair.jpg
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

BillK
Vectric Wizard
Posts: 594
Joined: Wed Mar 27, 2013 4:16 pm
Model of CNC Machine: CNC Shark Pro Plus
Contact:

Re: Beach scenes

Post by BillK »

Thanks Scott, haven't carved apple yet, made some tasty ribs with some once though. :D
BillK
https://www.facebook.com/CarvingsByKurtz

Post Reply