Pen and Pencil Box Completed

This is the place to post images of work produced using Aspire

Pen and Pencil Box Completed

Postby SteveNelson46 » Thu Apr 11, 2019 6:24 am

Well, I completed the first of two sets. All Walnut. The next set will be made out of Canarywood sometimes called Tulipwood. Carving the pen and pencil now. The spirals were turned on my Camaster Stinger recoil lathe and the blanks were drilled and turned on my Delta DVR lathe (last pic).
Attachments
DJ Pen and Pencil2.jpg
DJ Pen and Pencil3.jpg
DJ Pen and Pencil4.jpg
Blanks.jpg
Steve
User avatar
SteveNelson46
Vectric Wizard
 
Posts: 510
Joined: Wed Jan 04, 2012 2:43 pm
Location: Tucson, Az.
Model of CNC Machine: Camaster Stinger with Recoil Lathe

Re: Pen and Pencil Box Completed

Postby TReischl » Thu Apr 11, 2019 12:39 pm

Very nice!
"If you see a good fight, get in it." Dr. Vernon Jones
User avatar
TReischl
Vectric Wizard
 
Posts: 2775
Joined: Thu Jan 18, 2007 6:04 pm
Location: Leland NC
Model of CNC Machine: 8020 Build 48X36X10 RP 2010 Screenset

Re: Pen and Pencil Box Completed

Postby garylmast » Thu Apr 11, 2019 1:14 pm

Agree, very nice.

Gary
garylmast
Vectric Wizard
 
Posts: 956
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Re: Pen and Pencil Box Completed

Postby mtylerfl » Thu Apr 11, 2019 4:29 pm

Yes! Classy and beautiful!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 3938
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: Pen and Pencil Box Completed

Postby SteveNelson46 » Thu Apr 11, 2019 6:06 pm

Aw shucks guys. Now I feel all warm and fuzzy inside. All joking aside, thanks to all for the kind words.
Steve
User avatar
SteveNelson46
Vectric Wizard
 
Posts: 510
Joined: Wed Jan 04, 2012 2:43 pm
Location: Tucson, Az.
Model of CNC Machine: Camaster Stinger with Recoil Lathe

Re: Pen and Pencil Box Completed

Postby rtfosmoe » Wed May 01, 2019 10:15 pm

Very nice! Any chance you can upload and share the file for the pen box?

Rich
rtfosmoe
 
Posts: 14
Joined: Fri Feb 28, 2014 3:34 am
Model of CNC Machine: Shopbot

Re: Pen and Pencil Box Completed

Postby SteveNelson46 » Thu May 02, 2019 12:26 am

rtfosmoe wrote:Very nice! Any chance you can upload and share the file for the pen box?

Rich


Sure. This is the one made from Canarywood. Here's the link

https://1drv.ms/f/s!Al5SVN2NwjTqxgjuy97vNSMWxpN_

I made the pen and pencil a little non-standard by drilling the hole for the brass tube and turning the blank round on my lathe. The tubes were not glued in until after coming off of the CNC. I measured the tubes and designed the blanks accordingly. The top and bottom of the box was designed as a two-sided project using the asymmetrical 3 hole method in Aspire and carved as raster.
Attachments
Nick-Canarywood3.jpg
Nick-Canarywood4.jpg
Nick-Canarywood5.jpg
Pen Blanks.jpg
Steve
User avatar
SteveNelson46
Vectric Wizard
 
Posts: 510
Joined: Wed Jan 04, 2012 2:43 pm
Location: Tucson, Az.
Model of CNC Machine: Camaster Stinger with Recoil Lathe

Re: Pen and Pencil Box Completed

Postby scalci » Thu May 02, 2019 5:23 pm

Wow really nice job....
scalci
 
Posts: 9
Joined: Tue Jan 22, 2019 7:48 pm
Model of CNC Machine: Home Build Mach3

Re: Pen and Pencil Box Completed

Postby SteveNelson46 » Thu May 02, 2019 6:29 pm

Additional notes:

The pen and pencil brass tubes are the same diameter but different lengths. I designed and used a bit that probably doesn't exist but since they are cut as raster it really didn't matter.
Pen: Woodcraft part# 142416
Pencil: Woodcraft part# 141655
Outside diameter of wood blank: 7/16"

I don't sell anything I make. The project is not copyrighted nor is it a national treasure. Anyone can use the files for anything they choose. I just had a lot of fun designing and making them and I hope that anyone who decides to also make them has as much fun as I did.
Steve
User avatar
SteveNelson46
Vectric Wizard
 
Posts: 510
Joined: Wed Jan 04, 2012 2:43 pm
Location: Tucson, Az.
Model of CNC Machine: Camaster Stinger with Recoil Lathe

Re: Pen and Pencil Box Completed

Postby rtfosmoe » Thu May 02, 2019 10:33 pm

Thanks for offering the files, but the link doesn't work.


Rich
rtfosmoe
 
Posts: 14
Joined: Fri Feb 28, 2014 3:34 am
Model of CNC Machine: Shopbot

Re: Pen and Pencil Box Completed

Postby gkas » Fri May 03, 2019 12:06 am

rtfosmoe wrote:Thanks for offering the files, but the link doesn't work.


Rich


Works for me....
User avatar
gkas
Vectric Wizard
 
Posts: 419
Joined: Sun Jan 01, 2017 3:39 am
Location: Southern California
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser

Re: Pen and Pencil Box Completed

Postby SteveNelson46 » Fri May 03, 2019 5:11 pm

If the link doesn't work for you try this one.

https://1drv.ms/u/s!Al5SVN2NwjTqgoFDAoZJCS6C27OBfg
Steve
User avatar
SteveNelson46
Vectric Wizard
 
Posts: 510
Joined: Wed Jan 04, 2012 2:43 pm
Location: Tucson, Az.
Model of CNC Machine: Camaster Stinger with Recoil Lathe

Re: Pen and Pencil Box Completed

Postby Creation in Wood » Fri Jun 07, 2019 3:04 pm

Very nice work Steve
Thank You
Doug
User avatar
Creation in Wood
Vectric Wizard
 
Posts: 425
Joined: Thu May 28, 2015 8:58 pm
Location: Monument, Colorado USA
Model of CNC Machine: Legacy Maverick CNC 4x8


Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 19 guests