Precision Machining

This is the place to post images of work produced using Aspire

Precision Machining

Postby highpockets » Fri Mar 29, 2019 2:52 am

So you think your CNC can hold tight tolerances. :lol: :lol: :lol:

https://www.youtube.com/watch?v=1K9o5ltWozY&t=23s
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 2568
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Precision Machining

Postby gkas » Fri Mar 29, 2019 5:46 am

Wow!!!
User avatar
gkas
Vectric Wizard
 
Posts: 528
Joined: Sun Jan 01, 2017 3:39 am
Location: Southern California
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser

Re: Precision Machining

Postby FixitMike » Fri Mar 29, 2019 6:18 am

Around 1979, the company I worked for purchased a CNC mill to manufacture sideplates for the printing presses we built. Before then, printing press side plates were typically bored in pairs so the printing cylinders would be guaranteed to be parallel. A customer questioned that our method of manufacture was sufficiently accurate. The accuracy was demonstrated by placing 2 sideplates on top of each other, located by steel dowels in matching holes. We then placed a 6" diameter ball bearing in the upper plate, and it slowly slide down and into the lower plate without hesitation. This was repeated for all 3 cylinder locations. The customer was convinced.

I suspect that the pieces in the video were EDM (Electric Discharge Machined). That type of demonstration was typically used to show the accuracy of the process.
Good judgement comes from experience.
Experience comes from bad judgement.
User avatar
FixitMike
Vectric Wizard
 
Posts: 1564
Joined: Sun Apr 17, 2011 5:21 am
Location: Renton, WA USA
Model of CNC Machine: Shark Pro Plus (extensively modified)

Re: Precision Machining

Postby Leo » Fri Mar 29, 2019 1:12 pm

I work in gage making currently and daily at tolerances in the single millionths of an inch. Working in +/- .0001 or .0002 is a pretty wide open tolerance to me. I have a Studer S33 that is capable to .000010 accuracy.

Still, that video is fascinating to me, partly because I realize what it takes to do that work.

A lot of it is grinding but most of it is done by finish lapping. Wire EDM is good to .0001 and on occasion with super detail to .000050. Generally the finish is a dull finish, but can be polished and lapped.

No matter, what I am amazed at what can be done.

That was an awesome video - thank you
Imagine the Possibilities of a Creative mind

www.leosworkshop.com
User avatar
Leo
Vectric Wizard
 
Posts: 2972
Joined: Sat Jul 14, 2007 3:02 am
Location: East Freetown, Ma.
Model of CNC Machine: 1300 x 1300 x 254

Re: Precision Machining

Postby ger21 » Fri Mar 29, 2019 1:35 pm

Sure seems like those outside faces are ground after assembly to get that perfect "disappearing joint".
Gerry - http://www.thecncwoodworker.com
ger21
Vectric Wizard
 
Posts: 1502
Joined: Sun Sep 16, 2007 2:59 pm
Location: Shelby Township, MI, USA
Model of CNC Machine: Custom DIY

Re: Precision Machining

Postby scalci » Fri Mar 29, 2019 2:15 pm

Wow this is incredible...
scalci
 
Posts: 9
Joined: Tue Jan 22, 2019 7:48 pm
Model of CNC Machine: Home Build Mach3

Re: Precision Machining

Postby dwilli9013 » Fri Mar 29, 2019 3:23 pm

Pretty awesome video. I would suspect that caliper machining would be done in a climate controlled clean room. Pretty amazing I can't stop watching the video. Thanks for sharing that. :lol: :lol: :lol:
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 1230
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built

Re: Precision Machining

Postby BradyWatson » Mon Apr 01, 2019 1:53 am

Really cool...I like the helical one. It would make a great 'desk fidget' :D

Gauge blocks anyone: https://youtu.be/gbsd2OpPOMw
High Definition 3D Laser Scanning www.IBILD.com
User avatar
BradyWatson
Vectric Craftsman
 
Posts: 103
Joined: Fri Jan 13, 2006 5:57 pm
Location: South Jersey, USA


Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 29 guests