Viking Mug

This is the place to post images of work produced using Aspire

Viking Mug

Postby scovell » Sun Sep 15, 2019 3:38 pm

Here is a viking mug I made for game nights, renaissance festivals, octoberfests, etc.
I bought the viking face model on Etsy.

* A series of 10 rings were cut, pinned and glued together to create the mug. The bottom ring has a lip to prevent the tumbler from sliding through.
* The mug handle resembles an ax. Two rings were notched, so that the ax handle could be glued in place.
* The viking face was cut and then glued to the front of the mug. I would have liked to have cut the face directly into the mug but my machine doesn't have the height to do so.
* I used the tumbler as an insert as it keeps your cold drinks cold and your hot drinks hot. I also like that it can be removed to be washed.



User avatar
Posts: 44
Joined: Sat Jul 16, 2016 4:57 pm
Location: O Fallon, MO USA
Model of CNC Machine: Shark CNC

Re: Viking Mug

Postby Makingtoothpicks » Sun Sep 15, 2019 6:42 pm

Very nice. I may try that.
" sláinte "

User avatar
Vectric Apprentice
Posts: 489
Joined: Tue Jul 23, 2013 8:46 pm
Location: Burien, Wa
Model of CNC Machine: Cncrouterparts CPR2448

Re: Viking Mug

Postby BillK » Sun Sep 15, 2019 8:16 pm

Really nice! I like the effect from the grain on the individual rings.
Vectric Craftsman
Posts: 156
Joined: Wed Mar 27, 2013 4:16 pm
Model of CNC Machine: CNC Shark Pro Plus

Re: Viking Mug

Postby Phil » Sun Sep 15, 2019 11:42 pm

Cool, every Viking should have one. :)

User avatar
Vectric Wizard
Posts: 2324
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: Viking Mug

Postby scottp55 » Mon Sep 16, 2019 12:47 pm

+1 on the "ring" effect :)
Nice job!!
User avatar
Vectric Wizard
Posts: 3104
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10

Re: Viking Mug

Postby Creation in Wood » Tue Sep 24, 2019 3:47 pm

Great idea
Thank You
User avatar
Creation in Wood
Vectric Wizard
Posts: 448
Joined: Thu May 28, 2015 8:58 pm
Location: Monument, Colorado USA
Model of CNC Machine: Legacy Maverick CNC 4x8

Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 11 guests