CeorfanWorks

This is the place to post images of work produced using Aspire

CeorfanWorks

Postby JamesB » Wed Nov 14, 2018 4:21 pm

Hello, its been a while... I've been meaning to come and post on the forum for a while, to show some of the things I've been working on in Aspire now I have my own workshop. I'm full-time now (although seem to be goofing off today) but for the last year and a half I've been going in as and when I felt like it. I'm enjoying collaborating with Thomas Philpott Cabinet Makers who I share space with on many interesting things for their clients, as well as developing my own products. I'll post a few images below but the best place to catch up on everything is the portfolio and my bi-weekly journal on my website - https://ceorfan.works/

I'll try and be a more frequent visitor here now I'm a full-time and post new stuff as it gets made.

Cheers,
James Booth
Attachments
CeorfanWorks_Tattooed_Fists.JPG
White Oak Newel Posts - CNC carved, hand carved and hand pyrographed.
CeorfanWorks_Greenhouse_Window.jpg
Ornate greenhouse window - Painted Sapele.
CeorfanWorks_Mantel.JPG
Replica 17th Century Mantel - White Oak.
CeorfanWorks_Cherub_Window.JPG
Stained oak cherub window.
CeorfanWorks_Door.JPG
White oak door with walnut beading.
User avatar
JamesB
Vectric Alumni
 
Posts: 1255
Joined: Tue May 30, 2006 1:24 pm
Location: Warwickshire, UK
Model of CNC Machine: Exel CNC SL60/90 Pro

Re: CeorfanWorks

Postby garylmast » Wed Nov 14, 2018 8:44 pm

James,

There was a post a couple of weeks ago that showed your work. Very Impressive!

Gary

viewtopic.php?f=27&t=30803
garylmast
Vectric Wizard
 
Posts: 959
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Re: CeorfanWorks

Postby JamesB » Wed Nov 14, 2018 9:12 pm

Thanks Gary (and Randall for sharing). I'm having fun making some interesting and very varied stuff.

Cheers,
James
User avatar
JamesB
Vectric Alumni
 
Posts: 1255
Joined: Tue May 30, 2006 1:24 pm
Location: Warwickshire, UK
Model of CNC Machine: Exel CNC SL60/90 Pro

Re: CeorfanWorks

Postby scottp55 » Thu Nov 15, 2018 1:33 am

Stunned and Amazed...and very humble making James :D
Very hard to pick a favorite...But LOVE the greenhouse and the door!!
keep up the Master Pieces!! :)
scott
scott
User avatar
scottp55
Vectric Wizard
 
Posts: 3013
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP9.5

Re: CeorfanWorks

Postby mtylerfl » Thu Nov 15, 2018 5:53 am

Amazing and interesting work, as always, James!

I'm looking forward to your future postings here!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 3950
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: CeorfanWorks

Postby Bill_L » Thu Nov 15, 2018 12:37 pm

James,

Indubitably grand!! Might we see a "Tele" anytime soon?

Bill
Bill_L
Vectric Apprentice
 
Posts: 74
Joined: Tue Jan 24, 2006 11:57 am
Location: Imperial, PA USA

Re: CeorfanWorks

Postby martin54 » Thu Nov 15, 2018 1:00 pm

Always good to see your work James, keep the pictures coming :lol: :lol:

Has the customer told his wife about the Newal posts yet ?? :lol: :lol: :lol:
User avatar
martin54
Vectric Wizard
 
Posts: 4596
Joined: Fri Nov 09, 2012 2:12 pm
Location: Crossgates, Scotland
Model of CNC Machine: Gerber System 48 (modified)

Re: CeorfanWorks

Postby JamesB » Thu Nov 15, 2018 9:23 pm

Thanks all.

Bill - The "Tele" is still on my list but there is a lot of stuff before it!

Martin - to the best of my knowledge the clients wife has not yet seen the newel posts but they did get installed today so I guess she'll see them soon - I hope to go take a look tomorrow at them in place.

Today I was working on a celtic knot V-inlay for the clients stairs which is 428mm accross (approx. 17 inches) - I've not done one so large before - when we plane it in the morning we'll see if its worked or not!

Cheers,
James
User avatar
JamesB
Vectric Alumni
 
Posts: 1255
Joined: Tue May 30, 2006 1:24 pm
Location: Warwickshire, UK
Model of CNC Machine: Exel CNC SL60/90 Pro

Re: CeorfanWorks

Postby JamesB » Fri Nov 30, 2018 9:00 pm

A few new pictures of things from the last couple of weeks below and much more info and photos in my updated journal - https://ceorfan.works/journal/2018/11/3 ... -ash-stool

Cheers,
James
Attachments
Ceorfan_Works_02.JPG
Large 16" Walnut inlay into oak (then inlayed into walnut...)
Ceorfan_Works_15.JPG
Copy of panels from the new Tardis.
Ceorfan_Works_16.JPG
The Pear Chair - Wooden Bowl
Ceorfan_Works_24.JPG
An Ash stool I made for my son.
User avatar
JamesB
Vectric Alumni
 
Posts: 1255
Joined: Tue May 30, 2006 1:24 pm
Location: Warwickshire, UK
Model of CNC Machine: Exel CNC SL60/90 Pro

Re: CeorfanWorks

Postby mtylerfl » Fri Nov 30, 2018 9:18 pm

Great projects, James!

Did you purposely use Ash for the “ash stool”? I dunno - the name has a certain ring to it. :D
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 3950
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha


Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 20 guests