3D old man face

This is the place to post images of work produced using Aspire

3D old man face

Postby mark-s » Tue Dec 11, 2018 11:55 pm

Just finished this yesterday.
4 inch, maple, clear coat.
.125 ball nose bit.
Took about 1/2 hr. to cut.
Sure like doing 3D images.
mark-s
CNC OLD MAN FACE 5 INCH.jpg
mark-s
Vectric Apprentice
 
Posts: 171
Joined: Sat Feb 03, 2018 2:03 am
Location: So. Cal.
Model of CNC Machine: diy 4 X 4 CNC Router

Re: 3D old man face

Postby scottp55 » Wed Dec 12, 2018 1:10 am

AND You're getting good at it! :)

That model was one of my first's, and still love it!
When I! showed it...some smart aleck here said;
Who did the scan of you Scott? Remarkably accurate!" :D :D
OLD MAN LINSEED WAX 1 LIGHT COAT.jpg

Personally think it's my face when I look in a mirror when I first wake up and realize I ain't a young pup anymore:)


Nice Mark!
scott

Hope you didn't mind me posting the pic Mark:(

I got mine from 27Newstyle years ago, but he's cut way back. and don't see it anymore
https://www.ebay.com/sch/27newstyle/m.html?_nkw=&_armrs=1&_ipg=&_from=
Last edited by scottp55 on Wed Dec 12, 2018 1:33 am, edited 1 time in total.
scott
User avatar
scottp55
Vectric Wizard
 
Posts: 3056
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10

Re: 3D old man face

Postby GerryAttrick » Wed Dec 12, 2018 1:25 am

Is that file available for download?
GerryAttrick
Vectric Apprentice
 
Posts: 9
Joined: Sat Jun 30, 2018 8:52 am
Model of CNC Machine: Shapeoko3

Re: 3D old man face

Postby martin54 » Wed Dec 12, 2018 2:08 am

GerryAttrick wrote:Is that file available for download?


Its normally on that well known auction site, search for old men 3d model or something similar.
User avatar
martin54
Vectric Wizard
 
Posts: 4626
Joined: Fri Nov 09, 2012 2:12 pm
Location: Crossgates, Scotland
Model of CNC Machine: Gerber System 48 (modified)

Re: 3D old man face

Postby mark-s » Wed Dec 12, 2018 2:20 am

I found that model on the net for free, makes even better. LOL
Thank You Scott, you can post a picture and comment in my thread anytime.
You do great work.
I just keep looking for eye catching 3D modes on the net have some good ones.
Thanks everyone.
mark-s
mark-s
Vectric Apprentice
 
Posts: 171
Joined: Sat Feb 03, 2018 2:03 am
Location: So. Cal.
Model of CNC Machine: diy 4 X 4 CNC Router

Re: 3D old man face

Postby JimmyD » Wed Dec 12, 2018 7:47 am

It looks great.

Here is my version.

Jim
Attachments
old man 1.JPG
JimmyD
Vectric Apprentice
 
Posts: 79
Joined: Fri Jun 06, 2014 7:01 am
Location: Tucson, Arizona
Model of CNC Machine: ShopBot PRSalpha, custom rotary indexer

Re: 3D old man face

Postby scottp55 » Wed Dec 12, 2018 1:50 pm

Thanks Mark:)
I have NO sense of Forum etiquette, as only ever been active on this and Shopbot's forum.
Sometimes uncultured and hijack a thread like THIS :)

WONDERFUL look Jimmy D!!
I THINK I know how you jigged up that piece of Eastern White Cedar(?)(Juniper), BUT do you mind going into how you prepped and jigged the "Scrap:)" up?
My "Plow" guy also runs a tree service, and may be doing a Topo for him in exchange for Burls and interesting branches.
I LOVE using "Scrap"!
(virtually no such thing as scrap wood for me:)
My version started out as a scrap from a proto Cribbage Board, and only finished the S2S after I liked the cut so much.
I was just a beginner back then, and used an Offset toolpath as I would have SWORN it started at the tip of his Nose....WRONG!
Started just below his nose, and startled me on the first Plunge!! :oops: :)
Attachments
OLD MAN 2 CRIB BOARD SCRAP.jpg
OLD MAN 1.jpg
scott
User avatar
scottp55
Vectric Wizard
 
Posts: 3056
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10


Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 10 guests