Cut this tiki mask from an old cutting board I found at
the local swapmeet for $1.00.
Don`t know what kind of wood it is, but it was great for
cutting on the cnc, very little fuzzy`s.
19.05 thick.
Cut with .250 ball nose bit.
Very little clean up needed.
7 in X 11 in
Took about 1 hour.
Great fun.
mark-s
Tiki Mask
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Tiki Mask
Nice and an extra caveat that it's from reclaimed material. Thanks for sharing.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli