Page 1 of 1
some stamps and a medal box
Posted: Sat Aug 04, 2018 12:15 pm
by MTSO
Here are some presentation stamps made for a couple of commanders and a medal box for a person leaving the RNZAF after 37 years.
regards
Brian
Re: some stamps and a medal box
Posted: Sat Aug 04, 2018 12:17 pm
by MTSO
Re: some stamps and a medal box
Posted: Sat Aug 04, 2018 12:27 pm
by MTSO
I used recycled rimu for the medal case, it is quite sappy and has a tearing tendency when machining. the stamps are made from brass and have Malaysian Kauri for the handles which are made in two pieces with a bolt glued between them to hold the brass stamp. The bases for the stamps have an inverse of the model of the handle for positioning.
regards
Brian
Re: some stamps and a medal box
Posted: Sat Aug 04, 2018 2:21 pm
by Bob Reda
Really nice, like the design.
Bob
Re: some stamps and a medal box
Posted: Sat Aug 04, 2018 3:02 pm
by Mike-S
Those are beautiful.
What tools and settings did you use to get such a nice finish on the brass?
Re: some stamps and a medal box
Posted: Sat Aug 04, 2018 10:14 pm
by gkas
Great work. Fantastic projects.
Re: some stamps and a medal box
Posted: Sat Aug 04, 2018 10:45 pm
by GerryAttrick
Very nice Brian.
I left Auckland for Whangamata a while ago but have a niece whose partner is at Whenuapai - Mike Leonard.
I hope I get to do as good eventually. I am enjoying Vectric projects while I assemble my Shapeoko3.
Alan
Re: some stamps and a medal box
Posted: Sun Aug 05, 2018 3:41 am
by MTSO
Mike
The cutting parameters for the brass was 3mm ball nose for the roughing cut feed 300mm min step over .73, 1 mm depth of cut 40min cutting time.
The finishing cut was with a tapered ball nose 1/32" dia 0.005" step over, 15 inches per min. the model thickness is 1.9mm finish cut 1 hr 49mins.
The brass was 3" dia and cut on a milling machine not my cnc router.
Alan
I know Mikey Leonard, I have made a few things that he has wanted for presentos and has scrounged from me.
regards
Brian
Re: some stamps and a medal box
Posted: Sun Aug 05, 2018 4:15 pm
by Mike-S
Thank you. I'm cutting brass today and that info is very helpful.
Re: some stamps and a medal box
Posted: Sun Aug 05, 2018 8:53 pm
by MTSO
Mike
I forgot to say, the brass stamps were buffed them metal polished and finished with a spray on clear coat to keep the shine.
regards
Brian
Re: some stamps and a medal box
Posted: Sun Aug 05, 2018 10:39 pm
by scottp55
Gorgeous Brian!!
LOVE the fine detail!
Be proud of those jobs:)
scott
Re: some stamps and a medal box
Posted: Sun Aug 19, 2018 10:25 pm
by Creation in Wood
Very nice work
Re: some stamps and a medal box
Posted: Mon Aug 20, 2018 5:07 pm
by badgersurfer
Great work... can you tell me, is the RAF Wings model available for download?
Re: some stamps and a medal box
Posted: Mon Aug 20, 2018 11:05 pm
by MTSO
[Great work... can you tell me, is the RAF Wings model available for download]
The crest is the RNZAF crest
The model is available from cncmilitaryemblems.com
You will find that the RAF, RNZAF, RAAF and RCAF all have different eagles. The RNZAF eagle is the Haast eagle (Harpagornis moorei)
regards
Brian