Wine & Snack plate

This is the place to post images of work produced using Aspire

Wine & Snack plate

Postby Jozua » Sun Jun 10, 2018 11:15 am

This seems to be a popular subject. I didn’t want to hijack someone else’s post, so here is my version.

Cut out of Corian. I have had quite a few orders for these plates. I sell it in sets of 6.

I am very fortunate in the sense that I have more Corian than I can use in a lifetime, that is why I cut these plates in Corian only. A friend of mine have a business that install Corian products, he calls me on a regular basis to come and collect as many Corian off-cuts as I would like …. Free of charge.

Joz
Attachments
Snack & Wine plate.JPG
Snack & Wine plate-2.JPG
Snack & Wine plate-3.JPG
Jozua
Vectric Wizard
 
Posts: 364
Joined: Wed Nov 19, 2008 7:28 pm
Location: Bronkhorstspruit, South Africa
Model of CNC Machine: EZ-Router

Re: Wine & Snack plate

Postby dwilli9013 » Mon Jun 11, 2018 2:29 pm

very nice. And what a great hook up to have on the Corian cutoffs. :lol: :lol:
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 1019
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built

Re: Wine & Snack plate

Postby Jozua » Mon Jun 11, 2018 4:40 pm

Dwayne, Thank you for the compliment. As the saying goes : “ Somebody’s Trash is someone else’s Treasure”

Joz
Jozua
Vectric Wizard
 
Posts: 364
Joined: Wed Nov 19, 2008 7:28 pm
Location: Bronkhorstspruit, South Africa
Model of CNC Machine: EZ-Router

Re: Wine & Snack plate

Postby Creation in Wood » Tue Jun 12, 2018 2:45 am

Cool
Thank You
Doug
User avatar
Creation in Wood
Vectric Wizard
 
Posts: 349
Joined: Thu May 28, 2015 8:58 pm
Location: Monument, Colorado USA
Model of CNC Machine: Legacy Maverick CNC 4x8

Re: Wine & Snack plate

Postby mtylerfl » Tue Jun 12, 2018 2:09 pm

Very nice, Joz!

What bits are you using?
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 3085
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: Wine & Snack plate

Postby Jozua » Tue Jun 12, 2018 3:43 pm

mtylerfl wrote:What bits are you using?


Thanks for the compliment Michael,

I use a 25 mm (1 inch) straight bit for the large pocket (8mm deep) and a 6 mm (1/4 inch) ball nose with a 1.5mm offset for the large pocket, also the 6mm ball nose for the thumb and glass pockets. Cutout 6 mm upcut end mill.

Joz
Jozua
Vectric Wizard
 
Posts: 364
Joined: Wed Nov 19, 2008 7:28 pm
Location: Bronkhorstspruit, South Africa
Model of CNC Machine: EZ-Router

Re: Wine & Snack plate

Postby mtylerfl » Tue Jun 12, 2018 3:52 pm

Excellent. Thank you for the info on the bits. Your Corian trays have such a nice, smooth finish. Very professional work!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 3085
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: Wine & Snack plate

Postby davemartin88 » Wed Jun 13, 2018 12:41 pm

I do very similar snack plates, mostly from hardwoods. I usually have a carving in the plate and didn’t care for the look in Corian. Plus I don’t have a free supply! Your plates really look great.
Attachments
48155631-9981-4A89-AD20-12A375CA1348.jpeg
davemartin88
Vectric Craftsman
 
Posts: 197
Joined: Sun Jan 26, 2014 12:59 pm
Location: Romney, WV
Model of CNC Machine: CAMMaster Stinger II

Re: Wine & Snack plate

Postby Jozua » Wed Jun 13, 2018 3:21 pm

O!!! WOW!!! Yours look like designer plates! That is beautiful!!
Mine is just the common garden variety type. It takes me 45 minutes to cut a set of 6 plates. I imagine yours take a little longer.
Here is a sneak peek of my “treasure” some pieces are almost full sheets.

Joz
Attachments
DSC01209.JPG
DSC01210.JPG
DSC01211.JPG
Jozua
Vectric Wizard
 
Posts: 364
Joined: Wed Nov 19, 2008 7:28 pm
Location: Bronkhorstspruit, South Africa
Model of CNC Machine: EZ-Router

Re: Wine & Snack plate

Postby dwilli9013 » Wed Jun 13, 2018 5:27 pm

Oh what I would give for that connection......... :lol: :lol: :lol:
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 1019
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built

Re: Wine & Snack plate

Postby davemartin88 » Wed Jun 13, 2018 8:07 pm

Thanks for the compliment! I sell these through a local artist co-op, usually sets of 4 personalized like the ones in the picture. I try to keep the model simple but they can easily take 30 minutes or so each but I keep busy on other items while they cut. Certainly couldn’t make a living doing this kind of thing. When I tried to make some from Corian so they could go in the dishwasher, I just didn’t think the carving and lettering showed up well. I did a couple with an epoxy inlay but too much work! Thanks again.
davemartin88
Vectric Craftsman
 
Posts: 197
Joined: Sun Jan 26, 2014 12:59 pm
Location: Romney, WV
Model of CNC Machine: CAMMaster Stinger II


Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 16 guests