First time posting with a question. What would be some good settings for me to use for the attached photo on a lithophane?
Thanks
Adam
Quick Question
-
- Posts: 2
- Joined: Thu Nov 23, 2017 3:25 am
- Model of CNC Machine: Roctech router 48*96
- Location: Sardinia, OHIO
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: QUICK QUESTION
Adam,
You might want to take a look at the manual or watch some of the tutorials. Especially since you are just starting out on Aspire welcome to your newest addiction.
You might want to take a look at the manual or watch some of the tutorials. Especially since you are just starting out on Aspire welcome to your newest addiction.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
-
- Posts: 2
- Joined: Thu Nov 23, 2017 3:25 am
- Model of CNC Machine: Roctech router 48*96
- Location: Sardinia, OHIO
Re: QUICK QUESTION
Ok thanks
- Mike-S
- Vectric Wizard
- Posts: 1123
- Joined: Mon Jun 13, 2011 6:45 am
- Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)
- Location: Hayesville, NC
Re: QUICK QUESTION
Crop down to the two heads and kick the contrast up.
A 1/16th in. TBN should give good results for a 5 x 7 litho.
A 1/16th in. TBN should give good results for a 5 x 7 litho.