Interchangeable Multi Neck Guitar - The Multitar

This is the place to post images of work produced using Aspire
Post Reply
Stephanie Downing
Vectric Staff
Posts: 566
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Interchangeable Multi Neck Guitar - The Multitar

Post by Stephanie Downing »

What if...You could play an entire concert with one interchangeable instrument?

To watch Tim Sway bring his creation to life, click the video link below:



Watch this space for the full video on how to make this awesome creation along with the free project files.

User avatar
adze_cnc
Vectric Wizard
Posts: 4364
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: Interchangeable Multi Neck Guitar - The Multitar

Post by adze_cnc »

As a sidebar: how about one guitar controlling a mechanical "orchestra"? Pat Metheny's "Orchestrion" project https://youtu.be/KsYEOUKS4Yk

Steven

Stephanie Downing
Vectric Staff
Posts: 566
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Interchangeable Multi Neck Guitar - The Multitar

Post by Stephanie Downing »

If you're interested in making your own Interchangeable Multi Neck Guitar?

To watch the full video of how the Multitar was made click the link below:



To download the free project files head over to your V&CO account: https://portal.vectric.com/p/timswaymul ... partnerpro

If you decide to have a go, don't forget to share what you've made on here :)

Thanks

ThatGuyJosh
Posts: 12
Joined: Sun Jan 28, 2018 9:38 pm
Model of CNC Machine: ShopBot D2418
Location: East Windsor, NJ

Re: Interchangeable Multi Neck Guitar - The Multitar

Post by ThatGuyJosh »

Whoa, that's something else, and what a talented musician to boot! Thanks for sharing

Post Reply